Are you looking for Sanding Belts? Shop Our Extensive Range!



The Sandpaper Man is proud to be Australian Owned and Operated
Home :: Sanding Mop

Sanding Mops and Accessories

Sanding Mop
Check out our Sanding Mop Refill Packs.

180 mm diameter x 50 mm x 120 grit KLINGSPOR Mac Mop

 
(1 reviews)  
SKU: FW18050120
  • 1/4" Fixing spindle
  • Max RPM: 4200
  • 6 mm wide slash
This product is designed to be used on the outside edge of the fingers. The work piece should not be pushed into the wheel more than ¼”, as this is a finishing wheel.
Our price: $81.95
Order Quantity

180 mm diameter x 50 mm x 180 grit KLINGSPOR Mac Mop

 
(0 reviews)  
SKU: FW18050180
  • 1/4" Fixing spindle
  • Max RPM: 4200
  • 6 mm wide slash
This product is designed to be used on the outside edge of the fingers. The work piece should not be pushed into the wheel more than ¼”, as this is a finishing wheel.
Our price: $81.95

180 mm diameter x 50 mm x 240 grit KLINGSPOR Mac Mop

 
(0 reviews)  
SKU: FW18050240
  • 1/4" Fixing spindle
  • Max RPM: 4200
  • 6 mm wide slash
This product is designed to be used on the outside edge of the fingers. The work piece should not be pushed into the wheel more than ¼”, as this is a finishing wheel.
Our price: $81.95

180 mm diameter x 50 mm x 80 grit KLINGSPOR Mac Mop

 
(0 reviews)  
SKU: FW1805080
  • 1/4" Fixing spindle
  • Max RPM: 4200
  • 6 mm wide slash
This product is designed to be used on the outside edge of the fingers. The work piece should not be pushed into the wheel more than ¼”, as this is a finishing wheel.
Our price: $81.95
Order Quantity

1/2” Sanding Mop Arbor with 1/4” shank

 
(0 reviews)  
SKU: SMM23/8x1/2
  • Overall Length: 2 3/8".
  • Shaft: 3/4" x 1/4".
  • Thread Area: 1 1/4" length x 1/2" diameter.
  • This mandrel is for use with 2" x 6" sanding mop refill sheets.
Our price: $7.53
Order Quantity

Qty 10, Sanding Mop Refill Sheet Spacers for Sandmop Arbor

 
(0 reviews)  
SKU: SMS 10
  • Quantity of 10 spacers.
  • 1/2" ID x 3/4" OD spacers.
  • For Sanding Mop Refill Sheets.
  • Sanding Mop Refill Sheet Spacers are ideal for adding between sanding mop sheets to ensure flexibility.
Our price: $9.50

50 - 2" x 6" 80 grit Sanding Mop Refill Pack

 
(0 reviews)  
SKU: SMR2680 50
  • 4" wide x 6" long
  • 1/2" centre hole
  • Each refill is slashed to produce 8 fingers
  • Place two sheets back to back, criss-cross them to form a wheel, change angle 45 degrees criss-cross them again. Repeat this pattern until you have 16 to 48 sheets on the arbor.
  • Place spacers periodically for a flexible and less aggressive Sanding Mop.
  • Tighten the nut to hold sheets together.
  • Secure the assembly in your drill press, hand held drill, lathe, etc.
  • Before using the Sanding Mop on your project, break in the edge by holding a piece of scrap hardwood against it as it spins. This will "soften" the edge so it doesn't gouge your work.
  • Operate at a Maximum of 2300 r.p.m.
Our price: $53.76
Order Quantity

50 - 2" x 6" 120 grit Sanding Mop Refill Pack

 
(0 reviews)  
SKU: SMR26120 50
  • 4" wide x 6" long
  • 1/2" centre hole
  • Each refill is slashed to produce 8 fingers
  • Place two sheets back to back, criss-cross them to form a wheel, change angle 45 degrees criss-cross them again. Repeat this pattern until you have 16 to 48 sheets on the arbor.
  • Place spacers periodically for a flexible and less aggressive Sanding Mop.
  • Tighten the nut to hold sheets together.
  • Secure the assembly in your drill press, hand held drill, lathe, etc.
  • Before using the Sanding Mop on your project, break in the edge by holding a piece of scrap hardwood against it as it spins. This will "soften" the edge so it doesn't gouge your work.
  • Operate at a Maximum of 2300 r.p.m.
Our price: $47.78

50 - 2" x 6" 180 grit Sanding Mop Refill Pack

 
(0 reviews)  
SKU: SMR26180 50
  • 4" wide x 6" long
  • 1/2" centre hole
  • Each refill is slashed to produce 8 fingers
  • Place two sheets back to back, criss-cross them to form a wheel, change angle 45 degrees criss-cross them again. Repeat this pattern until you have 16 to 48 sheets on the arbor.
  • Place spacers periodically for a flexible and less aggressive Sanding Mop.
  • Tighten the nut to hold sheets together.
  • Secure the assembly in your drill press, hand held drill, lathe, etc.
  • Before using the Sanding Mop on your project, break in the edge by holding a piece of scrap hardwood against it as it spins. This will "soften" the edge so it doesn't gouge your work.
  • Operate at a Maximum of 2300 r.p.m.
Our price: $47.78
Order Quantity

50 - 2" x 6" 240 grit Sanding Mop Refill Pack

 
(0 reviews)  
SKU: SMR26240 50
  • 4" wide x 6" long
  • 1/2" centre hole
  • Each refill is slashed to produce 8 fingers
  • Place two sheets back to back, criss-cross them to form a wheel, change angle 45 degrees criss-cross them again. Repeat this pattern until you have 16 to 48 sheets on the arbor.
  • Place spacers periodically for a flexible and less aggressive Sanding Mop.
  • Tighten the nut to hold sheets together.
  • Secure the assembly in your drill press, hand held drill, lathe, etc.
  • Before using the Sanding Mop on your project, break in the edge by holding a piece of scrap hardwood against it as it spins. This will "soften" the edge so it doesn't gouge your work.
  • Operate at a Maximum of 2300 r.p.m.
Our price: $47.78
Order Quantity

50 - 2" x 6" 320 grit Sanding Mop Refill Pack

 
(0 reviews)  
SKU: SMR26320 50
  • 4" wide x 6" long
  • 1/2" centre hole
  • Each refill is slashed to produce 8 fingers
  • Place two sheets back to back, criss-cross them to form a wheel, change angle 45 degrees criss-cross them again. Repeat this pattern until you have 16 to 48 sheets on the arbor.
  • Place spacers periodically for a flexible and less aggressive Sanding Mop.
  • Tighten the nut to hold sheets together.
  • Secure the assembly in your drill press, hand held drill, lathe, etc.
  • Before using the Sanding Mop on your project, break in the edge by holding a piece of scrap hardwood against it as it spins. This will "soften" the edge so it doesn't gouge your work.
  • Operate at a Maximum of 2300 r.p.m.
Our price: $47.78

50 - 2" x 6" 400 grit Sanding Mop Refill Pack

 
(0 reviews)  
SKU: SMR26400 50
  • 4" wide x 6" long
  • 1/2" centre hole
  • Each refill is slashed to produce 8 fingers
  • Place two sheets back to back, criss-cross them to form a wheel, change angle 45 degrees criss-cross them again. Repeat this pattern until you have 16 to 48 sheets on the arbor.
  • Place spacers periodically for a flexible and less aggressive Sanding Mop.
  • Tighten the nut to hold sheets together.
  • Secure the assembly in your drill press, hand held drill, lathe, etc.
  • Before using the Sanding Mop on your project, break in the edge by holding a piece of scrap hardwood against it as it spins. This will "soften" the edge so it doesn't gouge your work.
  • Operate at a Maximum of 2300 r.p.m.
Our price: $54.00
Order Quantity

100 mm diameter x 80 grit Sanding Star

 
(0 reviews)  
SKU: SANDINGSTAR4 80
  • 1/4" Fixing spindle
  • Max RPM: 3200
  • KLINGSPOR brand
Our price: $26.36
Order Quantity

100 mm diameter x 120 grit Sanding Star

 
(0 reviews)  
SKU: SANDINGSTAR4 120
  • 1/4" Fixing spindle
  • Max RPM: 3200
  • KLINGSPOR brand
Our price: $26.36
Order Quantity

100 mm diameter x 180 grit Sanding Star

 
(0 reviews)  
SKU: SANDINGSTAR4 180
  • 1/4" Fixing spindle
  • Max RPM: 3200
  • KLINGSPOR brand
Our price: $26.36
Order Quantity

100 mm diameter x 220 grit Sanding Star

 
(0 reviews)  
SKU: SANDINGSTAR4 220
  • 1/4" Fixing spindle
  • Max RPM: 3200
  • KLINGSPOR brand
Our price: $26.36
Order Quantity