Accessories - Tack Cloths, Graphite Slip Cloth, Abrasive Restorer

• Medium Density Foam
• Hook and Loop face.
• M14 Thread
• Max RPM 8,500

Model AF4408S

This professional hand soap features a special scrubbing pad built into every bar to allow scrubbing and soaping to be done in one easy process.

• This converter pad updates your existing power tool or accessory to the modern technology of Hook and Loop Fastening System and their compatible sheets.
• It has an adhesive backing to attach to the base of your sander.
• When affixing converter pad to sander base or rubber backing plate, thoroughly clean the surface of any grease or other contaminant and allow to dry.
• Remove backing paper from converter pad to expose adhesive side to sander base or rubber backing plate, making sure that both surfaces are aligned.
• Your existing power tool or accessory is now ready to receive Velgrip sanding sheets.

• Pack of 50 Deveilbliss Mixing Cup 600ml.
• Calibrated with a 0-600 volumetric measurement scale.
• Mixing cups are marked with 2:1, 3:1 and 4:1 mix ratios.
• Cups are made from solvent resistant clear polyproylene.

• Graphite Slip Cloth reduces friction and heat on the back of your sanding belt.
• Sold in 100 mm increments.
• e.g. Qty 3 = 300 mm
• Attach to the Platen (metal sanding surface) of your sander.
• Hermes GL581 Slip Cloth is a Graphite Flake slip cloth.
• Extends belt life.
• Less join breakages due to join glue not heating as much.
• Reduces clogging due to less heat build-up.
• Can be attached using a good quality, heat-resistant glue. This can be purchased at your local hardware store.

• 50 mm diameter Hook and Loop back-up pad.
• 10 mm x 30 mm removable Hex shaft
• 23 mm of foam cushioning, (8 mm firm, 15 soft).
• Max. 3000 rpm
• The Hook and Loop face is suitable for Hook and Loop discs. Or you can cut your own discs from our Hook and Loop rolls.

• 75 mm diameter Tapered Hook and Loop back-up pad
• 6 mm diameter x 25 mm shaft
• 25 mm of foam cushioning
• Max. 2,500 rpm
• The Hook and Loop face is suitable for Hook and Loop discs. Or you can cut your own discs from our Hook and Loop rolls.

• 75 mm diameter Hook and Loop back-up pad.
• 6 mm diameter x 20 mm shaft.
• 25 mm of foam cushioning, (6 mm firm, 19 mm extremely soft.
• Max. 2,500 rpm
• The Hook and Loop face is suitable for Hook and Loop discs. Or you can cut your own discs from our Hook and Loop rolls.

• Ideal for attaching to 60 mm back up pad for bowl turning
• The pad has 16 mm of Soft Sponge Foam which produces a soft back up pad for fine sanding.
• The pad has a Loop base to attach to your Hook back up pad and a Hook face to attach your Hook & Loop compatible discs.

• Medium-hard backing pad for Abrasive Discs
• High temperature resistance
• M10 Thread
• Max 15,300 RPM

• Backing Pad for rough grinding
• Increased aggressiveness due to hard, ribbed abrasive surface
• High temperature resistance and stability
• M10 Thread
• Max 8,500 RPM

• Hook and Loop face.
• M14 Thread
• 25 mm Medium Density Foam
• Max RPM 5,500

• Hook and Loop face.
• With 5/16" UNF Thread
• 10 mm Soft Density Foam
• Max RPM 12,000

• Hook and Loop face.
• M14 Thread
• 25 mm Medium Density Foam
• Max RPM 5,500

• Ideal for attaching to 150 mm back up pad
• The pad has 10 mm of Soft Sponge Foam which produces a soft back up pad for fine sanding.
• The pad has a Loop base to attach to your Hook and Loop back up pad and a Hook and Loop face to attach your Hook and Loop compatible discs.

• Ideal for attaching to 200 mm back up pad
• The pad has 16 mm of Firm Sponge Foam.
• The pad has a Loop base to attach to your Hook and Loop back up pad and a Hook and Loop face to attach your Hook and Loop compatible discs.

• Ideal for attaching to 200 mm back up pad
• The pad has 8 mm of Medium Soft Sponge Foam which produces a soft back up pad for fine sanding.
• The pad has a Loop base to attach to your Hook and Loop back up pad and a Hook and Loop face to attach your Hook and Loop compatible discs.

• Ideal for attaching to 230 mm back up pad
• The pad has 8 mm of Medium Soft Sponge Foam which produces a soft back up pad for fine sanding.
• The pad has a Loop base to attach to your Hook and Loop back up pad and a Hook and Loop face to attach your Hook and Loop compatible discs.

• Ideal for attaching to 180 mm back up pad
• The pad has 16 mm of Soft Sponge Foam which produces a soft back up pad for fine sanding.
• The pad has a Loop base to attach to your Hook and Loop back up pad and a Hook and Loop face to attach your Hook and Loop compatible discs.