DM20 Flat Fold P2 Mask with Valve

DM20 Flat Fold P2 Mask with Valve
• Contains 1 mask.
• Australian Standard 1716 :2003

P2 Respirators may be used for mechanically & thermally generated particulates:
• dusts e.g. silica and coal
• mists, fumes, smoke e.g. lead & welding fumes + bushfire smoke

Applications include:
• Sanding, Grinding and blasting
 
DM20 - SUPERIOR COMFORT & CONVENIENCE:

Comfort
• One way exhalation valve helps minimise moisture and heat build up.
• Large filtering surface area provides low breathing resistance.
• Soft non-latex straps minimise irritation.
• Wide straps & padded nose bridge provides secure & comfortable fit.

Convenience
• Folds flat for easy storage before and in between usage.
• Individually wrapped for improved portability & hygiene.
 
Important Information
Shelf Life Storage & Operating Conditions
• Unopened respirators may be used up to 3 years from the date of manufacture.
• Store in a cool, dry location away from direct sunlight, ideally between 15-30 deg Celsius. Operating temperature 0-50 deg Celsius.
• Filter deteriorates in the presence of oil mist. Note that respirator should be discarded after eight hours use or earlier if filter becomes clogged and breathing resistance increases.

USE LIMITATIONS - DO NOT USE THIS RESPIRATOR WHERE:
• Contaminant concentrations are immediately dangerous to life and health, unknown or exceed ten times the relevant exposure standard for the contaminant.
• Toxic gases or vapours are present.
• After performing a fit check you are unable to obtain a satisfactory fit due to facial hair or other characteristics that prevent a good seal between the edge of the respirator and your face.
• Oxygen deficient atmospheres (<19.5%), confined spaces or poorly ventilated areas.
• You can smell, or taste the contaminant, experience nose or throat irritations or any other distress - leave the contaminated area.
• You have not been adequately trained in Selection use & maintenance of respiratory protection per AS/NZS 1715 & are unable to determine it's suitability for your application.

Please contact YHS via their website www.yhs.net.au or by phone 03 9876 7099 if you require further information regarding respirator selection, fit testing or training.
FAILURE TO FOLLOW ALL THE INSTRUCTIONS & USE LIMITATIONS FOR THIS PRODUCT CAN REDUCE IT'S EFFECTIVENESS AND MAY RESULT IN SICKNESS OR DEATH.
As the use of this information and the product is beyond the control of YHS Pty Ltd, it is the users obligation to ensure that the correct respirator is selected and used safely. To the extent permitted by law any liability arising from use of or failure of this product is limited to product replacement cost and does not extend to any loss or damage which may be caused as a consequence of such use or failure.
Made in China for YHS Pty Ltd

Details
SKU SPDM20 1
Quantity in stock 13 item(s) available
Weight 0.03 kg
 
Our price: $3.41
including GST
Options
Quantity (13 available)
: *
: *
: *
 
230 x 280 mm x 180 grit Norton A275 No-Fil Sheet
230 x 280 mm x 1200 grit Norton A275 No-Fil Sheet
230 x 280 mm x 180 grit Norton T417 Wet and Dry Sheet
230 x 280 mm x 180 grit Norton A275 No-Fil Sheet 230 x 280 mm x 1200 grit Norton A275 No-Fil Sheet 230 x 280 mm x 180 grit Norton T417 Wet and Dry Sheet
$1.62
$1.62
$1.35
 
230 x 280 mm x 240 grit Norton T417 Wet and Dry Sheet
230 x 280 mm x 800 grit Norton T417 Wet and Dry Sheet
230 x 280 mm x 80 grit Norton T417 Wet and Dry Sheet
230 x 280 mm x 240 grit Norton T417 Wet and Dry Sheet 230 x 280 mm x 800 grit Norton T417 Wet and Dry Sheet 230 x 280 mm x 80 grit Norton T417 Wet and Dry Sheet
$1.35
$1.35
$2.04
 
230 x 280 mm x 120 grit Norton T417 Wet and Dry Sheet
100 x 610 mm 80 grit Portable Sanding Belt
230 x 280 mm x 320 grit Norton A239 No-Fil Sheet
230 x 280 mm x 120 grit Norton T417 Wet and Dry Sheet 100 x 610 mm 80 grit Portable Sanding Belt 230 x 280 mm x 320 grit Norton A239 No-Fil Sheet
$1.51
$3.99
$1.18