Dust Masks

Dust Masks

Products

DM20 Flat Fold P2 Mask with Valve
• Contains 1 mask.
• Australian Standard 1716 :2003

P2 Respirators may be used for mechanically & thermally generated particulates:
• dusts e.g. silica and coal
• mists, fumes, smoke e.g. lead & welding fumes + bushfire smoke

Applications include:
• Sanding, Grinding and blasting
 
DM20 - SUPERIOR COMFORT & CONVENIENCE:

Comfort
• One way exhalation valve helps minimise moisture and heat build up.
• Large filtering surface area provides low breathing resistance.
• Soft non-latex straps minimise irritation.
• Wide straps & padded nose bridge provides secure & comfortable fit.

Convenience
• Folds flat for easy storage before and in between usage.
• Individually wrapped for improved portability & hygiene.
 
Important Information
Shelf Life Storage & Operating Conditions
• Unopened respirators may be used up to 3 years from the date of manufacture.
• Store in a cool, dry location away from direct sunlight, ideally between 15-30 deg Celsius. Operating temperature 0-50 deg Celsius.
• Filter deteriorates in the presence of oil mist. Note that respirator should be discarded after eight hours use or earlier if filter becomes clogged and breathing resistance increases.

USE LIMITATIONS - DO NOT USE THIS RESPIRATOR WHERE:
• Contaminant concentrations are immediately dangerous to life and health, unknown or exceed ten times the relevant exposure standard for the contaminant.
• Toxic gases or vapours are present.
• After performing a fit check you are unable to obtain a satisfactory fit due to facial hair or other characteristics that prevent a good seal between the edge of the respirator and your face.
• Oxygen deficient atmospheres (<19.5%), confined spaces or poorly ventilated areas.
• You can smell, or taste the contaminant, experience nose or throat irritations or any other distress - leave the contaminated area.
• You have not been adequately trained in Selection use & maintenance of respiratory protection per AS/NZS 1715 & are unable to determine it's suitability for your application.

Please contact YHS via their website www.yhs.net.au or by phone 03 9876 7099 if you require further information regarding respirator selection, fit testing or training.
FAILURE TO FOLLOW ALL THE INSTRUCTIONS & USE LIMITATIONS FOR THIS PRODUCT CAN REDUCE IT'S EFFECTIVENESS AND MAY RESULT IN SICKNESS OR DEATH.
As the use of this information and the product is beyond the control of YHS Pty Ltd, it is the users obligation to ensure that the correct respirator is selected and used safely. To the extent permitted by law any liability arising from use of or failure of this product is limited to product replacement cost and does not extend to any loss or damage which may be caused as a consequence of such use or failure.
Made in China for YHS Pty Ltd

Our price: $3.41
including GST
Order Quantity
DM20 Flat Fold P2 Mask with Valve - Box of 10
• Contains 10 masks.
• Australian Standard 1716 :2003

P2 Respirators may be used for mechanically & thermally generated particulates:
• dusts e.g. silica and coal
• mists, fumes, smoke e.g. lead & welding fumes + bushfire smoke

Applications include:
• Sanding, Grinding and blasting
 
DM20 - SUPERIOR COMFORT & CONVENIENCE:

Comfort
• One way exhalation valve helps minimise moisture and heat build up.
• Large filtering surface area provides low breathing resistance.
• Soft non-latex straps minimise irritation.
• Wide straps & padded nose bridge provides secure & comfortable fit.

Convenience
• Folds flat for easy storage before and in between usage.
• Individually wrapped for improved portability & hygiene.
 
Important Information
Shelf Life Storage & Operating Conditions
• Unopened respirators may be used up to 3 years from the date of manufacture.
• Store in a cool, dry location away from direct sunlight, ideally between 15-30 deg Celsius. Operating temperature 0-50 deg Celsius.
• Filter deteriorates in the presence of oil mist. Note that respirator should be discarded after eight hours use or earlier if filter becomes clogged and breathing resistance increases.

USE LIMITATIONS - DO NOT USE THIS RESPIRATOR WHERE:
• Contaminant concentrations are immediately dangerous to life and health, unknown or exceed ten times the relevant exposure standard for the contaminant.
• Toxic gases or vapours are present.
• After performing a fit check you are unable to obtain a satisfactory fit due to facial hair or other characteristics that prevent a good seal between the edge of the respirator and your face.
• Oxygen deficient atmospheres (<19.5%), confined spaces or poorly ventilated areas.
• You can smell, or taste the contaminant, experience nose or throat irritations or any other distress - leave the contaminated area.
• You have not been adequately trained in Selection use & maintenance of respiratory protection per AS/NZS 1715 & are unable to determine it's suitability for your application.

Please contact YHS via their website www.yhs.net.au or by phone 03 9876 7099 if you require further information regarding respirator selection, fit testing or training.
FAILURE TO FOLLOW ALL THE INSTRUCTIONS & USE LIMITATIONS FOR THIS PRODUCT CAN REDUCE IT'S EFFECTIVENESS AND MAY RESULT IN SICKNESS OR DEATH.
As the use of this information and the product is beyond the control of YHS Pty Ltd, it is the users obligation to ensure that the correct respirator is selected and used safely. To the extent permitted by law any liability arising from use of or failure of this product is limited to product replacement cost and does not extend to any loss or damage which may be caused as a consequence of such use or failure.
Made in China for YHS Pty Ltd

Our price: $27.28
including GST
Order Quantity
Nuisance Dust Masks - Box of 50
• Contains 50 masks.
• Disposable Mask for sanding, mowing, dusting and cleaning.
• Suitable for use against non-toxic dust, powder, pollen and other common airborne irritants around the home, factory, farm and garden.
Ideal for:
• Wood, plaster and plastic sanding.
• Cleaning basements, attics, garages, and dusty work areas.
• Yard, garden and farmwork.
• Lab or clean room use.

WARNING:
• This product will not protect against gases, vapours.
• It is not suitable for protecting the wearer when spraying paint, handling asbestos or welding.
• It is only suitable for non-toxic dust, such as sawdusts, household and garden dusts.

Important Notice to Purchaser:
The following warranty is made in lieu of all other warranties expressed or implied, including but not limited to the implied warranties of merchantability and fitness for purpose. Manufacturer's only obligation shall be to replace such quantity of product proved to be defective. User shall determine the suitability of the product for his intended use, and assume all risks and liability in connection therewith.
Our price: $13.68
including GST
Order Quantity
Toxic Dust Mist Masks P1 - Box of 20
• Contains 20 masks.
• Tested to Australian Standard 1716 Class P1.
• P1 - Disposable Mask for sanding, sawing and insulation fibres.
• Provides protection against hardwood and softwoods, fibreglass dust, aluminium, coal, cotton dust, flour, iron ore, manganese, mica, free silica, talc and many others.
• Also for mists of liquid which do not produce harmful gases or vapours eg. oil mists.

• WARNING:
• NOT SUITABLE FOR ANY PAINTING PROCESS.
• This product will not protect against gases, vapours, fumes or paint spray.
• Do not use this product against thermal generated particles such as metal fumes from welding.
• Do not use this respirator if mechanically generated particulates exceed 10 times their Threshold Limited Values (TLV).
• Not suitable for Asbestos, Sand blasting operations, Highly Toxic atmospheres, Oxygen deficient areas, Confined spaces or Rescue work.

Important Notice to Purchaser:
The following warranty is made in lieu of all other warranties expressed or implied, including but not limited to the implied warranties of merchantability and fitness for purpose. Manufacturer's only obligation shall be to replace such quantity of product proved to be defective. User shall determine the suitability of the product for his intended use, and assume all risks and liability in connection therewith.
Our price: $27.84
including GST
Order Quantity
Toxic Dust Mist Welding Fume Mask P2 with Valve - Box of 12
• Contains 12 masks.
• Tested to Australian Standard 1716 Class P2.
• P2 - Disposable Mask for welding fumes, toxic wood, and metal dusts.
• Provides protection against mechanically and thermally generated particles such as hardwood and softwood dust, mist and fumes to Class P2 and including metallic fume from smelting, welding, brazing, etc. Also, mists of liquids which do not produce harmful gases or vapours.

• WARNING:
• NOT SUITABLE FOR ANY PAINTING PROCESS.
• This product will not protect against gases, vapours, or paint spray.
• Not suitable for asbestos or sand blasting.
• Only for oxygen atmospheres over 19.5%.
• Not for contaminants dangerous to life or health.
• Not for concentrations exceeding x 10TLV.
• Facial hair will affect seal.
• Do Not alter or modify this mask.
• Do not use with hexavalent chromium, cyanide, radioactive compounds, arsenic, beryllium, and cadmium.

Important Notice to Purchaser:
The following warranty is made in lieu of all other warranties expressed or implied, including but not limited to the implied warranties of merchantability and fitness for purpose. Manufacturer's only obligation shall be to replace such quantity of product proved to be defective. User shall determine the suitability of the product for his intended use, and assume all risks and liability in connection therewith.
Our price: $34.66
including GST
Order Quantity