We are stocktaking at present, so no orders will be processed during this time. Processing of orders will commence once stocktake is complete.



The Sandpaper Man is proud to be Australian Owned and Operated
Home :: Flap Wheels

Flap Wheels, Sanding Mops and Mac Mops

Flap Wheels
We stock a variety of Flap Wheels including Sanding Mops, Mac Mops and Sanding Stars. These products are available in a variety of grits ranging from 80 - 400.

25 mm diameter x 25 mm x 6 mm Spindle 80 grit Pferd Flap Wheel

 
(0 reviews)  
SKU: FW252580PFERD
  • High stock removal due to the aggressive coated abrasive.
  • High flexibility.
  • Carrier material wears off uniformly and without residue on the workpiece surface, meaning that sharp abrasive grit is exposed at all times.
  • Due to the flat cast core construction, the face of the mounted flap wheels can be used to work very close to edges and in corners.
Our price: $6.53
Order Quantity

60 mm diameter x 30 mm x 6 mm Spindle 60 grit Pferd Flap Wheel

 
(0 reviews)  
SKU: FW503060PFERD
  • High stock removal due to the aggressive coated abrasive.
  • High flexibility.
  • Carrier material wears off uniformly and without residue on the workpiece surface, meaning that sharp abrasive grit is exposed at all times.
  • Due to the flat cast core construction, the face of the mounted flap wheels can be used to work very close to edges and in corners.
Our price: $9.49
Order Quantity

60 mm diameter x 50 mm x 6 mm Spindle 80 grit Pferd Flap Wheel

 
(0 reviews)  
SKU: FW605080PFERD
  • High stock removal due to the aggressive coated abrasive.
  • High flexibility.
  • Carrier material wears off uniformly and without residue on the workpiece surface, meaning that sharp abrasive grit is exposed at all times.
  • Due to the flat cast core construction, the face of the mounted flap wheels can be used to work very close to edges and in corners.
Our price: $13.89
Order Quantity

100 x 16 mm 40 grit Flexovit Zirconia Flap Disc

 
(0 reviews)  
SKU: FD10040ZIRC
  • Ideal for use on both carbon and stainless steels along with other heat sensitive materials.
Our price: $17.11
Order Quantity Price
10+ Items $11.43
*Note:
Order Quantity

115 x 22 mm 80 grit sia 2824 STINGRAY Blue Zirconia siaflap Flap Disc

 
(0 reviews)  
SKU: FDS115802824
  • Designed for general treatment of unalloyed or low-alloy steel, 2824 siaflap with zirconia alumina and its robust cloth backing provides a high removal rate and long lifetime. Another advantage is the consistent surface quality until the abrasive has been completely used up.
Our price: $5.04
Order Quantity

125 x 22 mm 60 grit Curve Ceramic Pferd Flap Disc

 
(0 reviews)  
SKU: FDP12560CURVE M
  • High-performance tool SGP CO-CURVE with high stock removal rates, for demanding grinding work, especially for achieving fine surface finishes. The ceramic oxide grain guarantees extremely cool grinding on materials which do not conduct heat well, which means optimum grinding results without thermal damage to the workpiece.
Our price: $21.74

127 x 22 mm Coarse Brown Norton Rapid Blend Surface Conditioning Flap Disc

 
(0 reviews)  
SKU: FDF125BROWN
  • Norton Bear-Tex Brown (Coarse) Surface Conditioning Material.
Our price: $23.03
Order Quantity

1/2” Sanding Mop Arbor with 1/4” shank

 
(0 reviews)  
SKU: SMM23/8x1/2
  • Overall Length: 2 3/8".
  • Shaft: 3/4" x 1/4".
  • Thread Area: 1 1/4" length x 1/2" diameter.
  • This mandrel is for use with 2" x 6" sanding mop refill sheets.
Our price: $8.33
Order Quantity

50 - 2" x 6" 80 grit Sanding Mop Refill Pack

 
(0 reviews)  
SKU: SMR2680 50
  • 4" wide x 6" long
  • 1/2" centre hole
  • Each refill is slashed to produce 8 fingers
  • Place two sheets back to back, criss-cross them to form a wheel, change angle 45 degrees criss-cross them again. Repeat this pattern until you have 16 to 48 sheets on the arbor.
  • Place spacers periodically for a flexible and less aggressive Sanding Mop.
  • Tighten the nut to hold sheets together.
  • Secure the assembly in your drill press, hand held drill, lathe, etc.
  • Before using the Sanding Mop on your project, break in the edge by holding a piece of scrap hardwood against it as it spins. This will "soften" the edge so it doesn't gouge your work.
  • Operate at a Maximum of 2300 r.p.m.
Our price: $70.40
Order Quantity

100 mm diameter x 80 grit Sanding Star

 
(0 reviews)  
SKU: SANDINGSTAR4 80
  • 1/4" Fixing spindle
  • Max RPM: 3200
  • KLINGSPOR brand
Our price: $30.18
Order Quantity

180 mm diameter x 50 mm x 80 grit KLINGSPOR Mac Mop

 
(0 reviews)  
SKU: FW1805080
  • 1/4" Fixing spindle
  • Max RPM: 4200
  • 6 mm wide slash
This product is designed to be used on the outside edge of the fingers. The work piece should not be pushed into the wheel more than ¼”, as this is a finishing wheel.
Our price: $94.11
Order Quantity

50 - 2" x 6" 120 grit Sanding Mop Refill Pack

 
(0 reviews)  
SKU: SMR26120 50
  • 4" wide x 6" long
  • 1/2" centre hole
  • Each refill is slashed to produce 8 fingers
  • Place two sheets back to back, criss-cross them to form a wheel, change angle 45 degrees criss-cross them again. Repeat this pattern until you have 16 to 48 sheets on the arbor.
  • Place spacers periodically for a flexible and less aggressive Sanding Mop.
  • Tighten the nut to hold sheets together.
  • Secure the assembly in your drill press, hand held drill, lathe, etc.
  • Before using the Sanding Mop on your project, break in the edge by holding a piece of scrap hardwood against it as it spins. This will "soften" the edge so it doesn't gouge your work.
  • Operate at a Maximum of 2300 r.p.m.
Our price: $64.48
Order Quantity

100 mm diameter x 120 grit Sanding Star

 
(0 reviews)  
SKU: SANDINGSTAR4 120
  • 1/4" Fixing spindle
  • Max RPM: 3200
  • KLINGSPOR brand
Our price: $30.18
Order Quantity

180 mm diameter x 50 mm x 120 grit KLINGSPOR Mac Mop

 
(1 reviews)  
SKU: FW18050120
  • 1/4" Fixing spindle
  • Max RPM: 4200
  • 6 mm wide slash
This product is designed to be used on the outside edge of the fingers. The work piece should not be pushed into the wheel more than ¼”, as this is a finishing wheel.
Our price: $94.11

50 - 2" x 6" 180 grit Sanding Mop Refill Pack

 
(0 reviews)  
SKU: SMR26180 50
  • 4" wide x 6" long
  • 1/2" centre hole
  • Each refill is slashed to produce 8 fingers
  • Place two sheets back to back, criss-cross them to form a wheel, change angle 45 degrees criss-cross them again. Repeat this pattern until you have 16 to 48 sheets on the arbor.
  • Place spacers periodically for a flexible and less aggressive Sanding Mop.
  • Tighten the nut to hold sheets together.
  • Secure the assembly in your drill press, hand held drill, lathe, etc.
  • Before using the Sanding Mop on your project, break in the edge by holding a piece of scrap hardwood against it as it spins. This will "soften" the edge so it doesn't gouge your work.
  • Operate at a Maximum of 2300 r.p.m.
Our price: $64.48
Order Quantity

100 mm diameter x 180 grit Sanding Star

 
(0 reviews)  
SKU: SANDINGSTAR4 180
  • 1/4" Fixing spindle
  • Max RPM: 3200
  • KLINGSPOR brand
Our price: $30.18
Order Quantity

180 mm diameter x 50 mm x 180 grit KLINGSPOR Mac Mop

 
(1 reviews)  
SKU: FW18050180
  • 1/4" Fixing spindle
  • Max RPM: 4200
  • 6 mm wide slash
This product is designed to be used on the outside edge of the fingers. The work piece should not be pushed into the wheel more than ¼”, as this is a finishing wheel.
Our price: $94.11
Order Quantity

100 mm diameter x 220 grit Sanding Star

 
(0 reviews)  
SKU: SANDINGSTAR4 220
  • 1/4" Fixing spindle
  • Max RPM: 3200
  • KLINGSPOR brand
Our price: $30.18
Order Quantity

50 - 2" x 6" 240 grit Sanding Mop Refill Pack

 
(0 reviews)  
SKU: SMR26240 50
  • 4" wide x 6" long
  • 1/2" centre hole
  • Each refill is slashed to produce 8 fingers
  • Place two sheets back to back, criss-cross them to form a wheel, change angle 45 degrees criss-cross them again. Repeat this pattern until you have 16 to 48 sheets on the arbor.
  • Place spacers periodically for a flexible and less aggressive Sanding Mop.
  • Tighten the nut to hold sheets together.
  • Secure the assembly in your drill press, hand held drill, lathe, etc.
  • Before using the Sanding Mop on your project, break in the edge by holding a piece of scrap hardwood against it as it spins. This will "soften" the edge so it doesn't gouge your work.
  • Operate at a Maximum of 2300 r.p.m.
Our price: $64.48
Order Quantity

180 mm diameter x 50 mm x 240 grit KLINGSPOR Mac Mop

 
(0 reviews)  
SKU: FW18050240
  • 1/4" Fixing spindle
  • Max RPM: 4200
  • 6 mm wide slash
This product is designed to be used on the outside edge of the fingers. The work piece should not be pushed into the wheel more than ¼”, as this is a finishing wheel.
Our price: $94.11
Order Quantity

50 - 2" x 6" 320 grit Sanding Mop Refill Pack

 
(0 reviews)  
SKU: SMR26320 50
  • 4" wide x 6" long
  • 1/2" centre hole
  • Each refill is slashed to produce 8 fingers
  • Place two sheets back to back, criss-cross them to form a wheel, change angle 45 degrees criss-cross them again. Repeat this pattern until you have 16 to 48 sheets on the arbor.
  • Place spacers periodically for a flexible and less aggressive Sanding Mop.
  • Tighten the nut to hold sheets together.
  • Secure the assembly in your drill press, hand held drill, lathe, etc.
  • Before using the Sanding Mop on your project, break in the edge by holding a piece of scrap hardwood against it as it spins. This will "soften" the edge so it doesn't gouge your work.
  • Operate at a Maximum of 2300 r.p.m.
Our price: $64.48
Order Quantity

50 - 2" x 6" 400 grit Sanding Mop Refill Pack

 
(0 reviews)  
SKU: SMR26400 50
  • 4" wide x 6" long
  • 1/2" centre hole
  • Each refill is slashed to produce 8 fingers
  • Place two sheets back to back, criss-cross them to form a wheel, change angle 45 degrees criss-cross them again. Repeat this pattern until you have 16 to 48 sheets on the arbor.
  • Place spacers periodically for a flexible and less aggressive Sanding Mop.
  • Tighten the nut to hold sheets together.
  • Secure the assembly in your drill press, hand held drill, lathe, etc.
  • Before using the Sanding Mop on your project, break in the edge by holding a piece of scrap hardwood against it as it spins. This will "soften" the edge so it doesn't gouge your work.
  • Operate at a Maximum of 2300 r.p.m.
Our price: $64.48
Order Quantity