KLINGSPOR

Products

100 - 1" x 4" 320 grit Sanding Mop Refill Pack

• 1" wide x 4" long
• 1/2" centre hole
• Each refill is slashed to produce 6 fingers
• Place two sheets back to back, criss-cross them to form a wheel, change angle 45 degrees criss-cross them again. Repeat this pattern until you have 16 to 48 sheets on the arbor.
• Place spacers periodically for a flexible and less aggressive Sanding Mop.
• Tighten the nut to hold sheets together.
• Secure the assembly in your drill press, hand held drill, lathe, etc.
• Before using the Sanding Mop on your project, break in the edge by holding a piece of scrap hardwood against it as it spins. This will "soften" the edge so it doesn't gouge your work.
• Operate at a Maximum of 2300 r.p.m.

Our price: $53.18
including GST
Order Quantity Out of stock

50 x 686 mm 40 grit KLINGSPOR CS411X Sanding Belt

Suitable for Metalworking
• Grain: Zirconia
• Coating: Close
• Bonding: Resin
• Backing: X-cotton
• Join: Tape
High aggressiveness and abrasive performance in rough grinding of steel and stainless steel - very versatile in all areas of metalworking

Our price: $7.44
including GST
Order Quantity

50 x 686 mm 60 grit KLINGSPOR CS411X Sanding Belt

Suitable for Metalworking
• Grain: Zirconia
• Coating: Close
• Bonding: Resin
• Backing: X-cotton
• Join: Tape
High aggressiveness and abrasive performance in rough grinding of steel and stainless steel - very versatile in all areas of metalworking

Our price: $6.83
including GST
Order Quantity Out of stock

50 x 686 mm 80 grit KLINGSPOR CS411X Sanding Belt

Suitable for Metalworking
• Grain: Zirconia
• Coating: Close
• Bonding: Resin
• Backing: X-cotton
• Join: Tape
High aggressiveness and abrasive performance in rough grinding of steel and stainless steel - very versatile in all areas of metalworking

Our price: $6.48
including GST
Order Quantity

50 x 686 mm 120 grit KLINGSPOR CS411X Sanding Belt

Suitable for Metalworking
• Grain: Zirconia
• Coating: Close
• Bonding: Resin
• Backing: X-cotton
• Join: Tape
High aggressiveness and abrasive performance in rough grinding of steel and stainless steel - very versatile in all areas of metalworking

Our price: $6.30
including GST
Order Quantity

50 x 686 mm 240 grit KLINGSPOR CS310X Sanding Belt

Suitable for Metal and Woodwork
• Grain: Aluminium Oxide
• Coating: Close
• Bonding: Resin
• Backing: X-Cotton
• Join: Tape
High-quality universal sanding belt for metalworking and woodworking - Good removal rate under high stress.

Our price: $5.26
including GST
Order Quantity

50 x 686 mm 320 grit KLINGSPOR CS310X Sanding Belt

Suitable for Metal and Woodwork
• Grain: Aluminium Oxide
• Coating: Close
• Bonding: Resin
• Backing: X-Cotton
• Join: Tape
High-quality universal sanding belt for metalworking and woodworking - Good removal rate under high stress.

Our price: $5.26
including GST
Order Quantity

50 x 686 mm 400 grit KLINGSPOR CS310X Sanding Belt

Suitable for Metal and Woodwork
• Grain: Aluminium Oxide
• Coating: Close
• Bonding: Resin
• Backing: X-Cotton
• Join: Tape
High-quality universal sanding belt for metalworking and woodworking - Good removal rate under high stress.

Our price: $5.26
including GST
Order Quantity

50 x 686 mm 600 grit KLINGSPOR CS310X Sanding Belt

Suitable for Metal and Woodwork
• Grain: Aluminium Oxide
• Coating: Close
• Bonding: Resin
• Backing: X-Cotton
• Join: Tape
High-quality universal sanding belt for metalworking and woodworking - Good removal rate under high stress.

Our price: $5.26
including GST
Order Quantity

100 x 914 mm 40 grit KLINGSPOR CS411X Sanding Belt

Suitable for Metalworking
• Grain: Zirconia
• Coating: Close
• Bonding: Resin
• Backing: X-cotton
• Join: Tape
High aggressiveness and abrasive performance in rough grinding of steel and stain-less steel - very versatile in all areas of metalworking

Our price: $15.72
including GST
Order Quantity

125 mm diameter x 22 mm x 16 grit KLINGSPOR CS561

• Aluminium Oxide grain.
• To be used with suitable fibre disc Back-up pad.
• KLINGSPOR brand - made in Germany
Our price: $3.43
including GST
Order Quantity
Note: Order Quantity, as per pull-down tab.

180 mm diameter x 50 mm x 80 grit KLINGSPOR Mac Mop

• 1/4" Fixing spindle
• Max RPM: 4200
• 6 mm wide slash
Our price: $73.88
including GST
Order Quantity

180 mm x 22 mm x 16 grit KLINGSPOR CS561

• Aluminium Oxide grain.
• To be used with suitable fibre disc Back-up pad.
• KLINGSPOR brand - made in Germany

Our price: $6.25
including GST
Order Quantity
Note: Order Quantity, as per pull-down tab.

100 x 914 mm 40 grit KLINGSPOR CS311Y Sanding Belt

Suitable for Woodworking
• Grain: Aluminium Oxide
• Coating: Open
• Bonding: Resin
• Backing: Y-polyester
• Join: Tape
Specially developed for calibration grinding of wood - Reduced clogging and longer service life due to "ACT - Advanced Coating Technology" and anti-static properties.
 

Our price: $12.06
including GST
Order Quantity

180 mm diameter x 50 mm x 120 grit KLINGSPOR Mac Mop

• 1/4" Fixing spindle
• Max RPM: 4200
• 6 mm wide slash
Our price: $73.88
including GST
Order Quantity Out of stock

180 mm diameter x 50 mm x 180 grit KLINGSPOR Mac Mop

• 1/4" Fixing spindle
• Max RPM: 4200
• 6 mm wide slash
Our price: $73.88
including GST
Order Quantity Out of stock

180 mm diameter x 50 mm x 240 grit KLINGSPOR Mac Mop

• 1/4" Fixing spindle
• Max RPM: 4200
• 6 mm wide slash
Our price: $73.88
including GST
Order Quantity Out of stock

150 mm x 1 metre x 1500 grit KLINGSPOR PS73 Hook & Loop roll

• This is KLINGSPOR brand PS73 BW material.
• It has a velour backing to attach to Hook and Loop hook.
• We are selling this sandpaper roll in 1 metre increments, up to a maximum length of 10 metres.
• For example, if you purchase a quantity of 3, you will receive 1 x 3 metre length.
• Made in Poland.
• Ideal for cutting your own 50 mm or 75 mm discs or triangles/delta shapes, and much more economical.
Our price: $10.15
including GST
Order Quantity

150 mm x 10 metre x 1500 grit KLINGSPOR PS73 Hook & Loop roll

• This is KLINGSPOR brand PS73 BW material.
• It has a velour backing to attach to Hook and Loop hook.
• Made in Poland.
• Ideal for cutting your own 50 mm or 75 mm discs or triangles/delta shapes, and much more economical.
Our price: $67.69
including GST
Order Quantity Out of stock

150 x 1220 mm 40 grit KLINGSPOR CS311Y Sanding Belt

Suitable for Woodworking
• Grain: Aluminium Oxide
• Coating: Open
• Bonding: Resin
• Backing: Y-polyester
• Join: Tape
Specially developed for calibration grinding of wood - Reduced clogging and longer service life due to "ACT - Advanced Coating Technology" and anti-static properties.
 

Our price: $22.52
including GST
Order Quantity

150 x 1220 mm 40 grit KLINGSPOR CS411X Sanding Belt

Suitable for Metalworking
• Grain: Zirconia
• Coating: Close
• Bonding: Resin
• Backing: X-cotton
• Join: Tape
High aggressiveness and abrasive performance in rough grinding of steel and stainless steel - very versatile in all areas of metalworking
 

Our price: $29.67
including GST
Order Quantity

150 x 2260 mm 40 grit KLINGSPOR CS311Y Sanding Belt

Suitable for Woodworking
• Grain: Aluminium Oxide
• Coating: Open
• Bonding: Resin
• Backing: Y-polyester
• Join: Tape
Specially developed for calibration sanding of wood - Reduced clogging and longer service life due to the ACT - Advanced Coating Technology recipe and anti-static properties.

Our price: $39.22
including GST
Order Quantity

150 x 2260 mm 60 grit KLINGSPOR CS311Y Sanding Belt

Suitable for Woodworking
• Grain: Aluminium Oxide
• Coating: Open
• Bonding: Resin
• Backing: Y-polyester
• Join: Tape
Specially developed for calibration sanding of wood - Reduced clogging and longer service life due to the ACT - Advanced Coating Technology recipe and anti-static properties.

Our price: $34.78
including GST
Order Quantity Out of stock

50 x 1220 mm 36 grit KLINGSPOR CS411X Sanding Belt

Suitable for Metalworking
• Grain: Zirconia
• Coating: Close
• Bonding: Resin
• Backing: X-cotton
• Join: Tape
High aggressiveness and abrasive performance in rough grinding of steel and stainless steel - very versatile in all areas of metalworking
 

Our price: $12.38
including GST
Order Quantity

100 mm diameter x 16 mm 16 grit KLINGSPOR CS561

• Aluminium Oxide grain.
• To be used with suitable fibre disc Back-up pad.
• KLINGSPOR brand - made in Germany
Our price: $2.50
including GST
Order Quantity
Note: Order Quantity, as per pull-down tab.

100 x 914 mm 60 grit KLINGSPOR CS411X Sanding Belt

Suitable for Metalworking
• Grain: Zirconia
• Coating: Close
• Bonding: Resin
• Backing: X-cotton
• Join: Tape
High aggressiveness and abrasive performance in rough grinding of steel and stain-less steel - very versatile in all areas of metalworking

Our price: $14.00
including GST
Order Quantity Out of stock

125 mm diameter x 22 mm x 24 grit KLINGSPOR CS561

• Aluminium Oxide grain.
• To be used with suitable fibre disc Back-up pad.
• KLINGSPOR brand - made in Germany
Our price: $2.80
including GST
Order Quantity
Note: Order Quantity, as per pull-down tab.

150 mm diameter x 120 grit KLINGSPOR PS21 Adhesive disc

• Premium Zirconia & Aluminium Oxide grain mix.
• Made in Germany.
• Designed for sanding metal so is excellent for hardwood sanding and stock removal.
• Disc has an F weight paper adhesive backing with liner.
Our price: $1.96
including GST
Order Quantity
Note: Order Quantity, as per pull-down tab.

150 x 1220 mm 60 grit KLINGSPOR CS310X Sanding Belt

Suitable for Metal and Woodwork
• Grain: Aluminium Oxide
• Coating: Close
• Bonding: Resin
• Backing: X-Cotton
• Join: Tape
High-quality universal sanding belt for metalworking and woodworking - Good removal rate under high stress.

Our price: $20.37
including GST
Order Quantity Out of stock

150 x 1220 mm 60 grit KLINGSPOR CS311Y Sanding Belt

Suitable for Woodworking
• Grain: Aluminium Oxide
• Coating: Open
• Bonding: Resin
• Backing: Y-polyester
• Join: Tape
Specially developed for calibration grinding of wood - Reduced clogging and longer service life due to "ACT - Advanced Coating Technology" and anti-static properties.
 

Our price: $20.14
including GST
Order Quantity

180 mm x 22 mm x 24 grit KLINGSPOR CS561

• Aluminium Oxide grain.
• To be used with suitable fibre disc Back-up pad.
• KLINGSPOR brand - made in Germany

Our price: $5.05
including GST
Order Quantity Out of stock
Note: Order Quantity, as per pull-down tab.

230 x 280 mm x 220 grit KLINGSPOR PS11 Wet and Dry Adhesive Sheet

• For wet or dry sanding of metal or acrylic painted surfaces.
• Grade - P220, 65 micron.
• Grain - Silicon Carbide
• Backing - PSA (Adhesive backed) Paper
• Sheet size is 230 x 280mm
• Just peel off the paper backing and press sheet down on the substrate.
• PSA (Adhesive backed) material is flatter, and because the adhesive is applied evenly, more of the abrasive sheet is used so it cuts faster.
• KLINGSPOR brand made in Germany.

Our price: $3.32
including GST
Order Quantity

50 x 1220 mm 40 grit KLINGSPOR CS411X Sanding Belt

Suitable for Metalworking
• Grain: Zirconia
• Coating: Close
• Bonding: Resin
• Backing: X-cotton
• Join: Tape
High aggressiveness and abrasive performance in rough grinding of steel and stainless steel - very versatile in all areas of metalworking
 

Our price: $11.30
including GST
Order Quantity

100 x 914 mm 60 grit KLINGSPOR CS311Y Sanding Belt

Suitable for Woodworking
• Grain: Aluminium Oxide
• Coating: Open
• Bonding: Resin
• Backing: Y-polyester
• Join: Tape
Specially developed for calibration grinding of wood - Reduced clogging and longer service life due to "ACT - Advanced Coating Technology" and anti-static properties.
 

Our price: $10.81
including GST
Order Quantity

150 x 1220 mm 60 grit KLINGSPOR CS411X Sanding Belt

Suitable for Metalworking
• Grain: Zirconia
• Coating: Close
• Bonding: Resin
• Backing: X-cotton
• Join: Tape
High aggressiveness and abrasive performance in rough grinding of steel and stainless steel - very versatile in all areas of metalworking
 

Our price: $26.32
including GST
Order Quantity

100 x 914 mm 80 grit KLINGSPOR CS411X Sanding Belt

Suitable for Metalworking
• Grain: Zirconia
• Coating: Close
• Bonding: Resin
• Backing: X-cotton
• Join: Tape
High aggressiveness and abrasive performance in rough grinding of steel and stain-less steel - very versatile in all areas of metalworking

Our price: $13.25
including GST
Order Quantity

150 x 1220 mm 80 grit KLINGSPOR CS311Y Sanding Belt

Suitable for Woodworking
• Grain: Aluminium Oxide
• Coating: Open
• Bonding: Resin
• Backing: Y-polyester
• Join: Tape
Specially developed for calibration grinding of wood - Reduced clogging and longer service life due to "ACT - Advanced Coating Technology" and anti-static properties.
 

Our price: $18.97
including GST
Order Quantity

150 x 2260 mm 80 grit KLINGSPOR CS311Y Sanding Belt

Suitable for Woodworking
• Grain: Aluminium Oxide
• Coating: Open
• Bonding: Resin
• Backing: Y-polyester
• Join: Tape
Specially developed for calibration sanding of wood - Reduced clogging and longer service life due to the ACT - Advanced Coating Technology recipe and anti-static properties.

Our price: $32.69
including GST
Order Quantity

50 x 914 mm 36 grit KLINGSPOR CS411X Sanding Belt

Suitable for Metalworking
• Grain: Zirconia
• Coating: Close
• Bonding: Resin
• Backing: X-cotton
• Join: Tape
High aggressiveness and abrasive performance in rough grinding of steel and stain-less steel - very versatile in all areas of metalworking

Our price: $9.79
including GST
Order Quantity

100 mm diameter x 16 mm 24 grit KLINGSPOR CS561

• Aluminium Oxide grain.
• To be used with suitable fibre disc Back-up pad.
• KLINGSPOR brand - made in Germany
Our price: $2.03
including GST
Order Quantity
Note: Order Quantity, as per pull-down tab.