Comprehensive range of Hook & Loop Sanding Discs. Check them out now!



The Sandpaper Man is proud to be Australian Owned and Operated
Home :: Manufacturers :: KLINGSPOR

KLINGSPOR

Products

70 mm x 25 metre x 600 grit KLINGSPOR PSA Wet and Dry Roll

SKU: RS70600KLINGSPOR
  • PSA (Pressure Sensitive Adhesive), Adhesive Backed
  • Silicon Carbide grain.
  • KLINGSPOR brand.
  • Made in Germany.
  • Suitable for Paint/Varnish/Filler, Glass/Stone, Plastic, Metal.
Our price: $82.71
including GST
Order Quantity Out of stock

100 x 914 mm 60 grit KLINGSPOR CS311Y Sanding Belt

SKU: NB10091460CS311Y

Suitable for Woodworking

  • Grain: Aluminium Oxide
  • Coating: Open
  • Bonding: Resin
  • Backing: Y-polyester
  • Join: Tape
Specially developed for calibration grinding of wood - Reduced clogging and longer service life due to "ACT - Advanced Coating Technology" and anti-static properties.
Our price: $12.09
including GST
Order Quantity Price*
6+ Items $8.08
*Note: including GST
Order Quantity

150 x 1220 mm 60 grit KLINGSPOR CS411X Sanding Belt

SKU: NB150122060CS411X

Suitable for Woodworking

  • Grain: Zirconia
  • Coating: Close
  • Bonding: Resin
  • Backing: X-cotton
  • Join: Tape
High aggressiveness and abrasive performance in rough grinding of steel and stainless steel - very versatile in all areas of metalworking
Our price: $29.42
including GST
Order Quantity Price*
6+ Items $19.65
*Note: including GST
Order Quantity

150 x 2260 mm 60 grit KLINGSPOR CS411X Sanding Belt

SKU: NB150226060CS411X

Suitable for Metalworking

  • Grain: Zirconia
  • Coating: Close
  • Bonding: Resin
  • Backing: X-cotton
  • Join: Tape
High aggressiveness and abrasive performance in rough grinding of steel and stainless steel - very versatile in all areas of metalworking
Our price: $34.45
including GST
Order Quantity

50 - 2" x 6" 180 grit Sanding Mop Refill Pack

SKU: SMR26180 50
  • 4" wide x 6" long
  • 1/2" centre hole
  • Each refill is slashed to produce 8 fingers
  • Place two sheets back to back, criss-cross them to form a wheel, change angle 45 degrees criss-cross them again. Repeat this pattern until you have 16 to 48 sheets on the arbor.
  • Place spacers periodically for a flexible and less aggressive Sanding Mop.
  • Tighten the nut to hold sheets together.
  • Secure the assembly in your drill press, hand held drill, lathe, etc.
  • Before using the Sanding Mop on your project, break in the edge by holding a piece of scrap hardwood against it as it spins. This will "soften" the edge so it doesn't gouge your work.
  • Operate at a Maximum of 2300 r.p.m.
Our price: $47.78
including GST
Order Quantity

100 mm diameter x 180 grit Sanding Star

SKU: SANDINGSTAR4 180
  • 1/4" Fixing spindle
  • Max RPM: 3200
  • KLINGSPOR brand

     

Our price: $26.36
including GST
Order Quantity

150 x 1220 mm 80 grit KLINGSPOR CS311Y Sanding Belt

SKU: NB150122080CS311Y

Suitable for Woodworking

  • Grain: Aluminium Oxide
  • Coating: Open
  • Bonding: Resin
  • Backing: Y-polyester
  • Join: Tape
Specially developed for calibration grinding of wood - Reduced clogging and longer service life due to "ACT - Advanced Coating Technology" and anti-static properties.
Our price: $18.97
including GST
Order Quantity Price*
6+ Items $12.67
*Note: including GST
Order Quantity

50 x 914 mm 36 grit KLINGSPOR CS411X Sanding Belt

SKU: NB5091436CS411X

Suitable for Metalworking

  • Grain: Zirconia
  • Coating: Close
  • Bonding: Resin
  • Backing: X-cotton
  • Join: Tape
High aggressiveness and abrasive performance in rough grinding of steel and stain-less steel - very versatile in all areas of metalworking
Our price: $10.96
including GST
Order Quantity Price*
6+ Items $7.32
*Note: including GST
Order Quantity

100 mm diameter x 16 mm 24 grit KLINGSPOR CS561

SKU: DF10024CS561
  • Aluminium Oxide grain.
  • To be used with suitable fibre disc Back-up pad.
  • KLINGSPOR brand - made in Germany
Our price: $2.27
including GST
Order Quantity Price*
25+ Items $1.32
*Note: including GST
Order Quantity
Note: Order Quantity, as per pull-down tab.

100 x 914 mm 80 grit KLINGSPOR CS411X Sanding Belt

SKU: NB10091480CS411X

Suitable for Metalworking

  • Grain: Zirconia
  • Coating: Close
  • Bonding: Resin
  • Backing: X-cotton
  • Join: Tape
High aggressiveness and abrasive performance in rough grinding of steel and stain-less steel - very versatile in all areas of metalworking
Our price: $14.80
including GST
Order Quantity Price*
6+ Items $9.89
*Note: including GST
Order Quantity

125 mm diameter x 22 mm x 36 grit KLINGSPOR CS561

SKU: DF12536CS561
  • Aluminium Oxide grain.
  • To be used with suitable fibre disc Back-up pad.
  • KLINGSPOR brand - made in Germany
Our price: $2.90
including GST
Order Quantity Price*
25+ Items $1.68
*Note: including GST
Order Quantity
Note: Order Quantity, as per pull-down tab.

150 x 1220 mm 80 grit KLINGSPOR CS411X Sanding Belt

SKU: NB150122080CS411X

Suitable for Woodworking

  • Grain: Zirconia
  • Coating: Close
  • Bonding: Resin
  • Backing: X-cotton
  • Join: Tape
High aggressiveness and abrasive performance in rough grinding of steel and stainless steel - very versatile in all areas of metalworking
Our price: $27.73
including GST
Order Quantity Price*
6+ Items $18.52
*Note: including GST
Order Quantity

150 x 2260 mm 80 grit KLINGSPOR CS311Y Sanding Belt

SKU: NB150226080CS311Y

Suitable for Woodworking

  • Grain: Aluminium Oxide
  • Coating: Open
  • Bonding: Resin
  • Backing: Y-polyester
  • Join: Tape
Specially developed for calibration sanding of wood - Reduced clogging and longer service life due to the ACT - Advanced Coating Technology recipe and anti-static properties.
Our price: $36.57
including GST
Order Quantity Price*
6+ Items $24.43
*Note: including GST
Order Quantity

150 x 340 mm 60 grit LS312JF Pneumatic Drum Belt

SKU: NB15034060LS312JF
  • Ultra Flexible J weight cloth.
  • Specially coated Aluminium oxide grain.
  • Tape join.
  • Material Brand: KLINGSPOR.
  • Made in Germany. Advantages
  • High removal rate.
  • Very good adaptation to radiuses and contours due to highly flexible cotton backing.
Our price: $8.93
including GST
Order Quantity Price*
6+ Items $5.97
*Note: including GST
Order Quantity

180 mm diameter x 50 mm x 240 grit KLINGSPOR Mac Mop

SKU: FW18050240
  • 1/4" Fixing spindle
  • Max RPM: 4200
  • 6 mm wide slash
This product is designed to be used on the outside edge of the fingers. The work piece should not be pushed into the wheel more than ¼”, as this is a finishing wheel.
Our price: $81.95
including GST
Order Quantity Out of stock

180 mm x 22 mm x 36 grit KLINGSPOR CS561

SKU: DF18036CS561
  • Aluminium Oxide grain.
  • To be used with suitable fibre disc Back-up pad.
  • KLINGSPOR brand - made in Germany
Our price: $5.27
including GST
Order Quantity Price*
25+ Items $3.06
*Note: including GST
Order Quantity
Note: Order Quantity, as per pull-down tab.

25 x 762 mm 240 grit KLINGSPOR CS310X Sanding Belt

SKU: NB25762240CS310X

Suitable for Metal and Woodwork

  • Grain: Aluminium Oxide
  • Coating: Close
  • Bonding: Resin
  • Backing: X-Cotton
  • Join: Tape
High-quality universal sanding belt for metalworking and woodworking - Good removal rate under high stress.
List price: $5.68
Our price: $4.62 save 19%
including GST
Order Quantity Price*
12+ Items $3.08
*Note: including GST
Order Quantity
Note: Order Quantity, as per pull-down tab.

50 x 1220 mm 60 grit KLINGSPOR CS411X Sanding Belt

SKU: NB50122060CS411X

Suitable for Metalworking

  • Grain: Zirconia
  • Coating: Close
  • Bonding: Resin
  • Backing: X-cotton
  • Join: Tape
High aggressiveness and abrasive performance in rough grinding of steel and stain-less steel - very versatile in all areas of metalworking
Our price: $11.35
including GST
Order Quantity Price*
6+ Items $7.58
*Note: including GST
Order Quantity

50 x 1830 mm 60 grit KLINGSPOR CS411X Sanding Belt

SKU: NB50183060CS411X

Suitable for Metalworking

  • Grain: Zirconia
  • Coating: Close
  • Bonding: Resin
  • Backing: X-cotton
  • Join: Tape
High aggressiveness and abrasive performance in rough grinding of steel and stainless steel - very versatile in all areas of metalworking
Our price: $15.31
including GST
Order Quantity Price*
6+ Items $10.22
*Note: including GST
Order Quantity

50 x 686 mm 400 grit KLINGSPOR CS310X Sanding Belt

SKU: NB50686400CS310X

Suitable for Metal and Woodwork

  • Grain: Aluminium Oxide
  • Coating: Close
  • Bonding: Resin
  • Backing: X-Cotton
  • Join: Tape
High-quality universal sanding belt for metalworking and woodworking - Good removal rate under high stress.
Our price: $5.87
including GST
Order Quantity Price*
6+ Items $3.92
*Note: including GST
Order Quantity Out of stock

50 x 914 mm 40 grit KLINGSPOR CS411X Sanding Belt

SKU: NB5091440CS411X

Suitable for Metalworking

  • Grain: Zirconia
  • Coating: Close
  • Bonding: Resin
  • Backing: X-cotton
  • Join: Tape
High aggressiveness and abrasive performance in rough grinding of steel and stain-less steel - very versatile in all areas of metalworking
Our price: $10.04
including GST
Order Quantity Price*
6+ Items $6.70
*Note: including GST
Order Quantity

70 mm x 25 metre x 800 grit KLINGSPOR PSA Wet and Dry Roll

SKU: RS70800KLINGSPOR
  • PSA (Pressure Sensitive Adhesive), Adhesive Backed
  • Silicon Carbide grain.
  • KLINGSPOR brand.
  • Made in Germany.
  • Suitable for Paint/Varnish/Filler, Glass/Stone, Plastic, Metal.
Our price: $82.71
including GST
Order Quantity Out of stock

100 mm diameter x 16 mm M10 Fibre Disc Back-up Pad

SKU: B/UP PAD FIBRE 100 K
  • Medium-hard backing pad for Abrasive Discs
  • High temperature resistance
  • M10 Thread
  • Max 15,300 RPM
List price: $9.28
Our price: $8.40 save 9%
including GST
Order Quantity

100 x 914 mm 80 grit KLINGSPOR CS311Y Sanding Belt

SKU: NB10091480CS311Y

Suitable for Woodworking

  • Grain: Aluminium Oxide
  • Coating: Open
  • Bonding: Resin
  • Backing: Y-polyester
  • Join: Tape
Specially developed for calibration grinding of wood - Reduced clogging and longer service life due to "ACT - Advanced Coating Technology" and anti-static properties.
Our price: $11.52
including GST
Order Quantity Price*
6+ Items $7.70
*Note: including GST
Order Quantity

50 x 914 mm 60 grit KLINGSPOR CS411X Sanding Belt

SKU: NB5091460CS411X

Suitable for Metalworking

  • Grain: Zirconia
  • Coating: Close
  • Bonding: Resin
  • Backing: X-cotton
  • Join: Tape
High aggressiveness and abrasive performance in rough grinding of steel and stain-less steel - very versatile in all areas of metalworking
Our price: $9.11
including GST
Order Quantity Price*
6+ Items $6.09
*Note: including GST
Order Quantity

100 mm diameter x 16 mm M10 Fibre Disc Ribbed Back-up Pad

SKU: B/UP PAD FIBRE 100 K RIB
  • Backing Pad for rough grinding
  • Increased aggressiveness due to hard, ribbed abrasive surface
  • High temperature resistance and stability
  • M10 Thread
  • Max 15,000 RPM
List price: $16.37
Our price: $14.81 save 10%
including GST
Order Quantity

100 mm diameter x 220 grit Sanding Star

SKU: SANDINGSTAR4 220
  • 1/4" Fixing spindle
  • Max RPM: 3200
  • KLINGSPOR brand

     

Our price: $26.36
including GST
Order Quantity

180 mm diameter x 22 mm M14 Fibre Disc Ribbed Back-up Pad

SKU: B/UP PAD FIBRE 180 K RIB
  • Backing Pad for rough grinding
  • Increased aggressiveness due to hard, ribbed abrasive surface
  • High temperature resistance and stability
  • M10 Thread
  • Max 8,500 RPM
List price: $38.01
Our price: $34.39 save 10%
including GST
Order Quantity

125 mm diameter x 22 mm M10 Fibre Disc Back-up Pad

SKU: B/UP PADFIBRE 125 K
  • Medium-hard backing pad for Abrasive Discs
  • High temperature resistance
  • M10 Thread
  • Max 15,300 RPM
List price: $16.67
Our price: $15.08 save 10%
including GST
Order Quantity

50 - 2" x 6" 240 grit Sanding Mop Refill Pack

SKU: SMR26240 50
  • 4" wide x 6" long
  • 1/2" centre hole
  • Each refill is slashed to produce 8 fingers
  • Place two sheets back to back, criss-cross them to form a wheel, change angle 45 degrees criss-cross them again. Repeat this pattern until you have 16 to 48 sheets on the arbor.
  • Place spacers periodically for a flexible and less aggressive Sanding Mop.
  • Tighten the nut to hold sheets together.
  • Secure the assembly in your drill press, hand held drill, lathe, etc.
  • Before using the Sanding Mop on your project, break in the edge by holding a piece of scrap hardwood against it as it spins. This will "soften" the edge so it doesn't gouge your work.
  • Operate at a Maximum of 2300 r.p.m.
Our price: $47.78
including GST
Order Quantity

150 x 1220 mm 100 grit KLINGSPOR CS311Y Sanding Belt

SKU: NB1501220100CS311Y

Suitable for Woodworking

  • Grain: Aluminium Oxide
  • Coating: Open
  • Bonding: Resin
  • Backing: Y-polyester
  • Join: Tape
Specially developed for calibration grinding of wood - Reduced clogging and longer service life due to "ACT - Advanced Coating Technology" and anti-static properties.
Our price: $20.43
including GST
Order Quantity Price*
6+ Items $13.64
*Note: including GST
Order Quantity Out of stock

100 mm diameter x 16 mm 36 grit KLINGSPOR CS561

SKU: DF10036CS561
  • Aluminium Oxide grain.
  • To be used with suitable fibre disc Back-up pad.
  • KLINGSPOR brand - made in Germany
Our price: $2.11
including GST
Order Quantity Price*
25+ Items $1.23
*Note: including GST
Order Quantity
Note: Order Quantity, as per pull-down tab.

100 x 914 mm 120 grit KLINGSPOR CS411X Sanding Belt

SKU: NB100914120CS411X

Suitable for Metalworking

  • Grain: Zirconia
  • Coating: Close
  • Bonding: Resin
  • Backing: X-cotton
  • Join: Tape
High aggressiveness and abrasive performance in rough grinding of steel and stain-less steel - very versatile in all areas of metalworking
Our price: $14.26
including GST
Order Quantity Price*
6+ Items $9.53
*Note: including GST
Order Quantity Out of stock

125 mm diameter x 22 mm x 50 grit KLINGSPOR CS561

SKU: DF12550CS561
  • Aluminium Oxide grain.
  • To be used with suitable fibre disc Back-up pad.
  • KLINGSPOR brand - made in Germany
Our price: $2.45
including GST
Order Quantity Price*
25+ Items $1.42
*Note: including GST
Order Quantity Out of stock
Note: Order Quantity, as per pull-down tab.

150 mm diameter x 320 grit KLINGSPOR PS21 Adhesive disc

SKU: DS150320PS21
  • Premium Zirconia & Aluminium Oxide grain mix.
  • Made in Germany.
  • Designed for sanding metal so is excellent for hardwood sanding and stock removal.
  • Disc has an F weight paper adhesive backing with liner.
Our price: $1.96
including GST
Order Quantity Price*
100+ Items $1.57
*Note: including GST
Order Quantity
Note: Order Quantity, as per pull-down tab.

150 x 2260 mm 100 grit KLINGSPOR CS311Y Sanding Belt

SKU: NB1502260100CS311Y

Suitable for Woodworking

  • Grain: Aluminium Oxide
  • Coating: Open
  • Bonding: Resin
  • Backing: Y-polyester
  • Join: Tape
Specially developed for calibration sanding of wood - Reduced clogging and longer service life due to the ACT - Advanced Coating Technology recipe and anti-static properties.
Our price: $35.11
including GST
Order Quantity Price*
6+ Items $23.45
*Note: including GST
Order Quantity

150 x 340 mm 80 grit LS309JF Pneumatic Drum Sanding Belt

SKU: NB15034080LS309JF
  • Ultra Flexible J weight cloth.
  • Aluminium oxide grain.
  • Tape join.
  • Material Brand: KLINGSPOR.
  • Made in Germany. Advantages
  • High removal rate.
  • Very good adaptation to radiuses and contours due to highly flexible cotton backing.
Our price: $8.46
including GST
Order Quantity Price*
6+ Items $5.65
*Note: including GST
Order Quantity Out of stock

180 mm x 22 mm x 60 grit KLINGSPOR CS561

SKU: DF18060CS561
  • Aluminium Oxide grain.
  • To be used with suitable fibre disc Back-up pad.
  • KLINGSPOR brand - made in Germany
Our price: $4.04
including GST
Order Quantity Price*
25+ Items $2.35
*Note: including GST
Order Quantity
Note: Order Quantity, as per pull-down tab.

50 x 1220 mm 80 grit KLINGSPOR CS411X Sanding Belt

SKU: NB50122080CS411X
Suitable for Metalworking
  • Grain: Zirconia
  • Coating: Close
  • Bonding: Resin
  • Backing: X-cotton
  • Join: Tape
  • High aggressiveness and abrasive performance in rough grinding of steel and stainless steel - very versatile in all areas of metalworking
    Our price: $10.81
    including GST
    Order Quantity Price*
    6+ Items $7.22
    *Note: including GST
    Order Quantity

    50 x 1830 mm 80 grit KLINGSPOR CS411X Sanding Belt

    SKU: NB50183080CS411X

    Suitable for Metalworking

    • Grain: Zirconia
    • Coating: Close
    • Bonding: Resin
    • Backing: X-cotton
    • Join: Tape
    High aggressiveness and abrasive performance in rough grinding of steel and stainless steel - very versatile in all areas of metalworking
    Our price: $14.47
    including GST
    Order Quantity Price*
    6+ Items $9.67
    *Note: including GST
    Order Quantity