The Sandpaper Man is proud to be Australian Owned and Operated
Home :: Manufacturers :: KLINGSPOR

KLINGSPOR

Products

25 x 762 mm 320 grit KLINGSPOR CS310X Sanding Belt

SKU: NB25762320CS310X

Suitable for Metal and Woodwork

  • Grain: Aluminium Oxide
  • Coating: Close
  • Bonding: Resin
  • Backing: X-Cotton
  • Join: Tape
High-quality universal sanding belt for metalworking and woodworking - Good removal rate under high stress.
List price: $5.68
Our price: $4.62 save 19%
including GST
Order Quantity Price*
12+ Items $3.08
*Note: including GST
Order Quantity
Note: Order Quantity, as per pull-down tab.

25 x 762 mm 400 grit KLINGSPOR CS310X Sanding Belt

SKU: NB25762400CS310X

Suitable for Metal and Woodwork

  • Grain: Aluminium Oxide
  • Coating: Close
  • Bonding: Resin
  • Backing: X-Cotton
  • Join: Tape
High-quality universal sanding belt for metalworking and woodworking - Good removal rate under high stress.
List price: $5.68
Our price: $4.62 save 19%
including GST
Order Quantity Price*
12+ Items $3.08
*Note: including GST
Order Quantity
Note: Order Quantity, as per pull-down tab.

125 mm diameter x 22 mm M10 Fibre Disc Back-up Pad

SKU: B/UP PADFIBRE 125 K
  • Medium-hard backing pad for Abrasive Discs
  • High temperature resistance
  • M10 Thread
  • Max 15,300 RPM
List price: $16.67
Our price: $15.08 save 10%
including GST
Order Quantity

25 x 762 mm 600 grit KLINGSPOR CS310X Sanding Belt

SKU: NB25762600CS310X

Suitable for Metal and Woodwork

  • Grain: Aluminium Oxide
  • Coating: Close
  • Bonding: Resin
  • Backing: X-Cotton
  • Join: Tape
High-quality universal sanding belt for metalworking and woodworking - Good removal rate under high stress.
List price: $5.68
Our price: $4.62 save 19%
including GST
Order Quantity Price*
12+ Items $3.08
*Note: including GST
Order Quantity
Note: Order Quantity, as per pull-down tab.

50 - 2" x 6" 240 grit Sanding Mop Refill Pack

SKU: SMR26240 50
  • 4" wide x 6" long
  • 1/2" centre hole
  • Each refill is slashed to produce 8 fingers
  • Place two sheets back to back, criss-cross them to form a wheel, change angle 45 degrees criss-cross them again. Repeat this pattern until you have 16 to 48 sheets on the arbor.
  • Place spacers periodically for a flexible and less aggressive Sanding Mop.
  • Tighten the nut to hold sheets together.
  • Secure the assembly in your drill press, hand held drill, lathe, etc.
  • Before using the Sanding Mop on your project, break in the edge by holding a piece of scrap hardwood against it as it spins. This will "soften" the edge so it doesn't gouge your work.
  • Operate at a Maximum of 2300 r.p.m.
Our price: $47.78
including GST
Order Quantity

150 x 1220 mm 100 grit KLINGSPOR CS311Y Sanding Belt

SKU: NB1501220100CS311Y

Suitable for Woodworking

  • Grain: Aluminium Oxide
  • Coating: Open
  • Bonding: Resin
  • Backing: Y-polyester
  • Join: Tape
Specially developed for calibration grinding of wood - Reduced clogging and longer service life due to "ACT - Advanced Coating Technology" and anti-static properties.
Our price: $20.43
including GST
Order Quantity Price*
6+ Items $13.64
*Note: including GST
Order Quantity Out of stock

100 mm diameter x 16 mm 36 grit KLINGSPOR CS561

SKU: DF10036CS561
  • Aluminium Oxide grain.
  • To be used with suitable fibre disc Back-up pad.
  • KLINGSPOR brand - made in Germany
Our price: $2.11
including GST
Order Quantity Price*
25+ Items $1.23
*Note: including GST
Order Quantity
Note: Order Quantity, as per pull-down tab.

100 x 914 mm 120 grit KLINGSPOR CS411X Sanding Belt

SKU: NB100914120CS411X

Suitable for Metalworking

  • Grain: Zirconia
  • Coating: Close
  • Bonding: Resin
  • Backing: X-cotton
  • Join: Tape
High aggressiveness and abrasive performance in rough grinding of steel and stain-less steel - very versatile in all areas of metalworking
Our price: $14.26
including GST
Order Quantity Price*
6+ Items $9.53
*Note: including GST
Order Quantity

125 mm diameter x 22 mm x 50 grit KLINGSPOR CS561

SKU: DF12550CS561
  • Aluminium Oxide grain.
  • To be used with suitable fibre disc Back-up pad.
  • KLINGSPOR brand - made in Germany
Our price: $2.45
including GST
Order Quantity Price*
25+ Items $1.42
*Note: including GST
Order Quantity Out of stock
Note: Order Quantity, as per pull-down tab.

150 mm diameter x 320 grit KLINGSPOR PS21 Adhesive disc

SKU: DS150320PS21
  • Premium Zirconia & Aluminium Oxide grain mix.
  • Made in Germany.
  • Designed for sanding metal so is excellent for hardwood sanding and stock removal.
  • Disc has an F weight paper adhesive backing with liner.
Our price: $1.96
including GST
Order Quantity Price*
100+ Items $1.57
*Note: including GST
Order Quantity Out of stock
Note: Order Quantity, as per pull-down tab.

150 x 2260 mm 100 grit KLINGSPOR CS311Y Sanding Belt

SKU: NB1502260100CS311Y

Suitable for Woodworking

  • Grain: Aluminium Oxide
  • Coating: Open
  • Bonding: Resin
  • Backing: Y-polyester
  • Join: Tape
Specially developed for calibration sanding of wood - Reduced clogging and longer service life due to the ACT - Advanced Coating Technology recipe and anti-static properties.
Our price: $35.11
including GST
Order Quantity Price*
6+ Items $23.45
*Note: including GST
Order Quantity Out of stock

150 x 340 mm 80 grit LS309JF Pneumatic Drum Sanding Belt

SKU: NB15034080LS309JF
  • Ultra Flexible J weight cloth.
  • Aluminium oxide grain.
  • Tape join.
  • Material Brand: KLINGSPOR.
  • Made in Germany. Advantages
  • High removal rate.
  • Very good adaptation to radiuses and contours due to highly flexible cotton backing.
Our price: $8.46
including GST
Order Quantity Price*
6+ Items $5.65
*Note: including GST
Order Quantity Out of stock

180 mm x 22 mm x 60 grit KLINGSPOR CS561

SKU: DF18060CS561
  • Aluminium Oxide grain.
  • To be used with suitable fibre disc Back-up pad.
  • KLINGSPOR brand - made in Germany
Our price: $4.04
including GST
Order Quantity Price*
25+ Items $2.35
*Note: including GST
Order Quantity
Note: Order Quantity, as per pull-down tab.

50 x 1220 mm 80 grit KLINGSPOR CS411X Sanding Belt

SKU: NB50122080CS411X
Suitable for Metalworking
  • Grain: Zirconia
  • Coating: Close
  • Bonding: Resin
  • Backing: X-cotton
  • Join: Tape
  • High aggressiveness and abrasive performance in rough grinding of steel and stainless steel - very versatile in all areas of metalworking
    Our price: $10.81
    including GST
    Order Quantity Price*
    6+ Items $7.22
    *Note: including GST
    Order Quantity

    50 x 1830 mm 80 grit KLINGSPOR CS411X Sanding Belt

    SKU: NB50183080CS411X

    Suitable for Metalworking

    • Grain: Zirconia
    • Coating: Close
    • Bonding: Resin
    • Backing: X-cotton
    • Join: Tape
    High aggressiveness and abrasive performance in rough grinding of steel and stainless steel - very versatile in all areas of metalworking
    Our price: $14.47
    including GST
    Order Quantity Price*
    6+ Items $9.67
    *Note: including GST
    Order Quantity

    50 x 686 mm 600 grit KLINGSPOR CS310X Sanding Belt

    SKU: NB50686600CS310X

    Suitable for Metal and Woodwork

    • Grain: Aluminium Oxide
    • Coating: Close
    • Bonding: Resin
    • Backing: X-Cotton
    • Join: Tape
    High-quality universal sanding belt for metalworking and woodworking - Good removal rate under high stress.
    Our price: $5.87
    including GST
    Order Quantity Price*
    6+ Items $3.92
    *Note: including GST
    Order Quantity

    50 x 914 mm 80 grit KLINGSPOR CS411X Sanding Belt

    SKU: NB5091480CS411X

    Suitable for Metalworking

    • Grain: Zirconia
    • Coating: Close
    • Bonding: Resin
    • Backing: X-cotton
    • Join: Tape
    High aggressiveness and abrasive performance in rough grinding of steel and stain-less steel - very versatile in all areas of metalworking
    Our price: $8.70
    including GST
    Order Quantity Price*
    6+ Items $5.81
    *Note: including GST
    Order Quantity

    70 mm x 25 metre x 1000 grit KLINGSPOR PSA Wet and Dry Roll

    SKU: RS701000KLINGSPOR
    • PSA (Pressure Sensitive Adhesive), Adhesive Backed
    • Silicon Carbide grain.
    • KLINGSPOR brand.
    • Made in Germany.
    • Suitable for Paint/Varnish/Filler, Glass/Stone, Plastic, Metal.
    Our price: $82.71
    including GST
    Order Quantity Out of stock

    100 x 914 mm 120 grit KLINGSPOR CS311Y Sanding Belt

    SKU: NB100914120CS311Y

    Suitable for Woodworking

    • Grain: Aluminium Oxide
    • Coating: Open
    • Bonding: Resin
    • Backing: Y-polyester
    • Join: Tape
    Specially developed for calibration grinding of wood - Reduced clogging and longer service life due to "ACT - Advanced Coating Technology" and anti-static properties.
    Our price: $11.11
    including GST
    Order Quantity Price*
    6+ Items $7.42
    *Note: including GST
    Order Quantity

    150 mm diameter x 320 grit KLINGSPOR PS11 Wet and Dry Adhesive disc

    SKU: DS150320PS11
    • For wet or dry sanding of metal or acrylic painted surfaces.
    • Only use wet on a Air operated Random Orbital sander.
    • Disc has an adhesive backing with a liner.
    • KLINGSPOR brand made in Germany
    Our price: $2.16
    including GST
    Order Quantity Price*
    100+ Items $1.44
    *Note: including GST
    Order Quantity
    Note: Order Quantity, as per pull-down tab.

    150 x 340 mm 80 grit LS312JF Pneumatic Drum Belt

    SKU: NB15034080LS312JF
    • Ultra Flexible J weight cloth.
    • Specially coated Aluminium oxide grain.
    • Tape join.
    • Material Brand: KLINGSPOR.
    • Made in Germany. Advantages
    • High removal rate.
    • Very good adaptation to radiuses and contours due to highly flexible cotton backing.
    Our price: $8.52
    including GST
    Order Quantity Price*
    6+ Items $5.69
    *Note: including GST
    Order Quantity

    150 x 340 mm 100 grit LS309JF Pneumatic Drum Sanding Belt

    SKU: NB150340100LS309JF
    • Ultra Flexible J weight cloth.
    • Aluminium oxide grain.
    • Tape join.
    • Material Brand: KLINGSPOR.
    • Made in Germany. Advantages
    • High removal rate.
    • Very good adaptation to radiuses and contours due to highly flexible cotton backing.
    Our price: $8.10
    including GST
    Order Quantity Price*
    12+ Items $5.41
    *Note: including GST
    Order Quantity Out of stock

    50 - 2" x 6" 320 grit Sanding Mop Refill Pack

    SKU: SMR26320 50
    • 4" wide x 6" long
    • 1/2" centre hole
    • Each refill is slashed to produce 8 fingers
    • Place two sheets back to back, criss-cross them to form a wheel, change angle 45 degrees criss-cross them again. Repeat this pattern until you have 16 to 48 sheets on the arbor.
    • Place spacers periodically for a flexible and less aggressive Sanding Mop.
    • Tighten the nut to hold sheets together.
    • Secure the assembly in your drill press, hand held drill, lathe, etc.
    • Before using the Sanding Mop on your project, break in the edge by holding a piece of scrap hardwood against it as it spins. This will "soften" the edge so it doesn't gouge your work.
    • Operate at a Maximum of 2300 r.p.m.
    Our price: $47.78
    including GST
    Order Quantity

    150 x 1220 mm 120 grit KLINGSPOR CS311Y Sanding Belt

    SKU: NB1501220120CS311Y

    Suitable for Woodworking

    • Grain: Aluminium Oxide
    • Coating: Open
    • Bonding: Resin
    • Backing: Y-polyester
    • Join: Tape
    Specially developed for calibration grinding of wood - Reduced clogging and longer service life due to "ACT - Advanced Coating Technology" and anti-static properties.
    Our price: $20.43
    including GST
    Order Quantity Price*
    6+ Items $13.64
    *Note: including GST
    Order Quantity

    100 mm diameter x 16 mm 60 grit KLINGSPOR CS561

    SKU: DF10060CS561
    • Aluminium Oxide grain.
    • To be used with suitable fibre disc Back-up pad.
    • KLINGSPOR brand - made in Germany
    Our price: $1.62
    including GST
    Order Quantity Price*
    25+ Items $0.94
    *Note: including GST
    Order Quantity
    Note: Order Quantity, as per pull-down tab.

    100 x 914 mm 180 grit KLINGSPOR CS310X Sanding Belt

    SKU: NB100914180CS310X

    Suitable for Metal and Woodwork

    • Grain: Aluminium Oxide
    • Coating: Close
    • Bonding: Resin
    • Backing: X-Cotton
    • Join: Tape
    High-quality universal sanding belt for metalworking and woodworking - Good removal rate under high stress.
    Our price: $11.23
    including GST
    Order Quantity Price*
    6+ Items $7.50
    *Note: including GST
    Order Quantity

    125 mm diameter x 22 mm x 60 grit KLINGSPOR CS561

    SKU: DF12560CS561
    • Aluminium Oxide grain.
    • To be used with suitable fibre disc Back-up pad.
    • KLINGSPOR brand - made in Germany
    Our price: $2.23
    including GST
    Order Quantity Price*
    25+ Items $1.30
    *Note: including GST
    Order Quantity
    Note: Order Quantity, as per pull-down tab.

    150 x 1220 mm 120 grit KLINGSPOR CS411X Sanding Belt

    SKU: NB1501220120CS411X

    Suitable for Woodworking

    • Grain: Zirconia
    • Coating: Close
    • Bonding: Resin
    • Backing: X-cotton
    • Join: Tape
    High aggressiveness and abrasive performance in rough grinding of steel and stainless steel - very versatile in all areas of metalworking
    Our price: $26.59
    including GST
    Order Quantity Price*
    6+ Items $17.76
    *Note: including GST
    Order Quantity

    150 x 2260 mm 120 grit KLINGSPOR CS311Y Sanding Belt

    SKU: NB1502260120CS311Y

    Suitable for Woodworking

    • Grain: Aluminium Oxide
    • Coating: Open
    • Bonding: Resin
    • Backing: Y-polyester
    • Join: Tape
    Specially developed for calibration sanding of wood - Reduced clogging and longer service life due to the ACT - Advanced Coating Technology recipe and anti-static properties.
    Our price: $35.11
    including GST
    Order Quantity Price*
    6+ Items $23.45
    *Note: including GST
    Order Quantity

    180 mm x 22 mm x 80 grit KLINGSPOR CS561

    SKU: DF18080CS561
    • Aluminium Oxide grain.
    • To be used with suitable fibre disc Back-up pad.
    • KLINGSPOR brand - made in Germany
    Our price: $3.93
    including GST
    Order Quantity Price*
    25+ Items $2.28
    *Note: including GST
    Order Quantity Out of stock
    Note: Order Quantity, as per pull-down tab.

    50 x 1220 mm 120 grit KLINGSPOR CS411X Sanding Belt

    SKU: NB501220120CS411X

    Suitable for Metalworking

    • Grain: Zirconia
    • Coating: Close
    • Bonding: Resin
    • Backing: X-cotton
    • Join: Tape
    High aggressiveness and abrasive performance in rough grinding of steel and stain-less steel - very versatile in all areas of metalworking
    Our price: $10.42
    including GST
    Order Quantity Price*
    6+ Items $6.96
    *Note: including GST
    Order Quantity

    50 x 1830 mm 120 grit KLINGSPOR CS411X Sanding Belt

    SKU: NB501830120CS411X

    Suitable for Metalworking

    • Grain: Zirconia
    • Coating: Close
    • Bonding: Resin
    • Backing: X-cotton
    • Join: Tape
    High aggressiveness and abrasive performance in rough grinding of steel and stainless steel - very versatile in all areas of metalworking
    Our price: $13.91
    including GST
    Order Quantity Price*
    6+ Items $9.29
    *Note: including GST
    Order Quantity Out of stock

    50 x 914 mm 120 grit KLINGSPOR CS411X Sanding Bellt

    SKU: NB50914120CS411X

    Suitable for Metalworking

    • Grain: Zirconia
    • Coating: Close
    • Bonding: Resin
    • Backing: X-cotton
    • Join: Tape
    High aggressiveness and abrasive performance in rough grinding of steel and stain-less steel - very versatile in all areas of metalworking
    Our price: $8.40
    including GST
    Order Quantity Price*
    6+ Items $5.61
    *Note: including GST
    Order Quantity

    70 mm x 25 metre x 1200 grit KLINGSPOR PSA Wet and Dry Roll

    SKU: RS701200KLINGSPOR
    • PSA (Pressure Sensitive Adhesive), Adhesive Backed
    • Silicon Carbide grain.
    • KLINGSPOR brand.
    • Made in Germany.
    • Suitable for Paint/Varnish/Filler, Glass/Stone, Plastic, Metal.
    Our price: $82.71
    including GST
    Order Quantity

    100 x 914 mm 180 grit KLINGSPOR CS311Y Sanding Belt

    SKU: NB100914180CS311Y

    Suitable for Woodworking

    • Grain: Aluminium Oxide
    • Coating: Open
    • Bonding: Resin
    • Backing: Y-polyester
    • Join: Tape
    Specially developed for calibration grinding of wood - Reduced clogging and longer service life due to "ACT - Advanced Coating Technology" and anti-static properties.
    Our price: $11.11
    including GST
    Order Quantity Price*
    6+ Items $7.42
    *Note: including GST
    Order Quantity

    Box of 25 - 100 mm diameter x 16 mm 60 grit KLINGSPOR CS565

    SKU: DF10060CS565 25
    • Zirconia grain.
    • To be used with suitable fibre disc Back-up pad.
    • High aggressiveness on steel and stainless steel
    • Ideal for rough grinding work
    • KLINGSPOR brand - made in Germany
    Our price: $32.25
    including GST
    Order Quantity

    50 - 2" x 6" 400 grit Sanding Mop Refill Pack

    SKU: SMR26400 50
    • 4" wide x 6" long
    • 1/2" centre hole
    • Each refill is slashed to produce 8 fingers
    • Place two sheets back to back, criss-cross them to form a wheel, change angle 45 degrees criss-cross them again. Repeat this pattern until you have 16 to 48 sheets on the arbor.
    • Place spacers periodically for a flexible and less aggressive Sanding Mop.
    • Tighten the nut to hold sheets together.
    • Secure the assembly in your drill press, hand held drill, lathe, etc.
    • Before using the Sanding Mop on your project, break in the edge by holding a piece of scrap hardwood against it as it spins. This will "soften" the edge so it doesn't gouge your work.
    • Operate at a Maximum of 2300 r.p.m.
    Our price: $54.00
    including GST
    Order Quantity

    150 x 1220 mm 180 grit KLINGSPOR CS311Y Sanding Belt

    SKU: NB1501220180CS311Y

    Suitable for Woodworking

    • Grain: Aluminium Oxide
    • Coating: Open
    • Bonding: Resin
    • Backing: Y-polyester
    • Join: Tape
    Specially developed for calibration grinding of wood - Reduced clogging and longer service life due to "ACT - Advanced Coating Technology" and anti-static properties.
    Our price: $20.43
    including GST
    Order Quantity Price*
    6+ Items $13.64
    *Note: including GST
    Order Quantity

    150 x 340 mm 120 grit LS309JF Pneumatic Drum Belt

    SKU: NB150340120LS309JF
    • Ultra Flexible J weight cloth.
    • Aluminium oxide grain.
    • Tape join.
    • Material Brand: KLINGSPOR.
    • Made in Germany. Advantages
    • High removal rate.
    • Very good adaptation to radiuses and contours due to highly flexible cotton backing.
    Our price: $7.92
    including GST
    Order Quantity Price*
    6+ Items $5.29
    *Note: including GST
    Order Quantity

    100 mm diameter x 16 mm 80 grit KLINGSPOR CS561

    SKU: DF10080CS561
    • Aluminium Oxide grain.
    • To be used with suitable fibre disc Back-up pad.
    • KLINGSPOR brand - made in Germany
    Our price: $1.57
    including GST
    Order Quantity Price*
    25+ Items $0.91
    *Note: including GST
    Order Quantity
    Note: Order Quantity, as per pull-down tab.