100 mm diameter x 16 mm Rapid Strip Disc
• Grade - Silicon Carbide Extra Coarse
• General coating removal and preparation of surfaces on stainless steel, mild steel, aluminium, plastics, ferro cement and other masonry products etc.
• Maximum Operating speed 13,300 rpm
• For use on a standard 100 mm diameter angle grinder.
• The Rapid Strip range of abrasives are iron free non-clogging "Surface Preparation Abrasives" as used in auto repair, marine, metal fabrication industries and in DIY.
• These products are used for obtaining specific finishes that cannot be obtained consistently with other forms of abrasive products.
• Specific uses are for the removal of coatings such as paint, epoxy, rust and oxidation as well as burrs and light weld splatter without causing damage to the surface.
• General coating removal and preparation of surfaces on stainless steel, mild steel, aluminium, plastics, ferro cement and other masonry products etc.
• Maximum Operating speed 13,300 rpm
• For use on a standard 100 mm diameter angle grinder.
• The Rapid Strip range of abrasives are iron free non-clogging "Surface Preparation Abrasives" as used in auto repair, marine, metal fabrication industries and in DIY.
• These products are used for obtaining specific finishes that cannot be obtained consistently with other forms of abrasive products.
• Specific uses are for the removal of coatings such as paint, epoxy, rust and oxidation as well as burrs and light weld splatter without causing damage to the surface.
Our price: $21.41
including GST
100 x 914 mm x 40 grit Norton R980P BLAZE Belt
• Grain is Ceramic with Top Size which Lowers Grinding Temperatures.
• Backing is Polyester/Cotton cloth
• Tape join.
• Best for Titanium and Stainless Steel
• Backing is Polyester/Cotton cloth
• Tape join.
• Best for Titanium and Stainless Steel
List price: $34.42
Our price: $30.39
save 12%
including GST
2 PACK - Norton ‘000’ Gray Extra Fine Synthetic Steel Wool Pads
• Quantity of 2 pads included.
• Ideal for cleaning, finishing, de-burring and polishing.
• Flexible non-woven pads are suitable replacements for steel wool.
• Conforms to the contours of work surfaces to provide a uniform finish.
• Grain - Silicon Carbide.
• Size - 111 mm x 140 mm.
• Synthetic, non-loading and will not rust, shred or splinter.
• Compatible with water-based finishes.
• Used to sand between coats of primer, sealer lacquer and paint.
Applications include:
• Light cleaning steel.
• Denibbing plastic.
• Defuzzing wood.
• Finishing or blending.
Our price: $6.48
including GST
2 PACK - Norton ‘0000’ White Super Fine Synthetic Steel Wool Pads
• Quantity of 2 pads included.
• Ideal for cleaning a variety of materials and for highlighting and rubbing wood.
• Non-abrasive product.
• Size - 111 mm x 140 mm.
• Won't rust, shed or splinter.
• Compatible with water-based finishes.
• Washable and reusable.
Applications include:
• Light cleaning of glass, porcelain, stainless steel.
• Highlighting and rubbing wood.
Our price: $5.58
including GST
150 mm diameter 7 hole Norton Hook & Loop Back up Pad
• Medium density with Hook & Loop face
• Supplied with 5/16" UNF bolt and M8 bolt with adaptor to suit Festool sanders.
• This back-up pad has the extra centre hole to be compatible with the new sanders that now extract from the centre hole as well as the six outer holes.
• Supplied with 5/16" UNF bolt and M8 bolt with adaptor to suit Festool sanders.
• This back-up pad has the extra centre hole to be compatible with the new sanders that now extract from the centre hole as well as the six outer holes.
List price: $90.38
Our price: $67.78
save 25%
including GST
5 - 150 mm x 80 grit BLAZE Cyclonic Hook & Loop Sanding Disc
• Pack of 5 discs
• Blaze Multi-Air Cyclonic A995 Hook & Loop Vacuum Disc with Dust Extraction Holes
• As these are multi-hole they can be used on all types of dust extraction back-up pads.
• Ideal for sanding and finishing applications on aluminium, fibreglass, composites and wood.
• A sharp, P-graded ceramic aluminium oxide abrasive delivers outstanding cutting speed.
• Laser-cut spiral vacuum hole design helps the A995 outperform other paper discs, ensuring cool, fast cuts, optimal dust extraction and durability.
• Delivers 50-60% better tear resistance and flexibility, the disc offers a fibre-reinforced D-weight latex-saturated backing.
• The water-based, non-pigmented stearate No-Fil coating and open coat guarantee zero colour transfer and minimal loading.
• Blaze Multi-Air Cyclonic A995 Hook & Loop Vacuum Disc with Dust Extraction Holes
• As these are multi-hole they can be used on all types of dust extraction back-up pads.
• Ideal for sanding and finishing applications on aluminium, fibreglass, composites and wood.
• A sharp, P-graded ceramic aluminium oxide abrasive delivers outstanding cutting speed.
• Laser-cut spiral vacuum hole design helps the A995 outperform other paper discs, ensuring cool, fast cuts, optimal dust extraction and durability.
• Delivers 50-60% better tear resistance and flexibility, the disc offers a fibre-reinforced D-weight latex-saturated backing.
• The water-based, non-pigmented stearate No-Fil coating and open coat guarantee zero colour transfer and minimal loading.
Our price: $16.18
including GST
Qty 5 - 150 mm x 120 grit Norton A975 Dry Ice Multi-Air Cyclonic Hook & Loop Sanding Disc
Our price: $11.71
including GST
Qty 5 - 150 mm x 80 grit Norton A975 Dry Ice Multi-Air Cyclonic Hook & Loop Sanding Disc
Our price: $11.71
including GST
Qty 5 - 150 mm x 800 grit Norton A975 Dry Ice Multi-Air Cyclonic Hook & Loop Sanding Disc
Our price: $11.71
including GST
115 x 230 mm Very Fine Maroon Aluminium Oxide Thin Flex Bear-Tex pads
• Multi-purpose economy product ideal for sanding wooden floors.
• Colour - Maroon
• Grit - Very Fine.
• Grain - Aluminium Oxide
• Size - 115 mm x 230 mm
• Strong cloth backing.
• Open grain construction.
• Good cut rate and reduced clogging.
• Ideal for use before primer and on primed surfaces.
• Removes rust and cleans metal.
Our price: $3.50
including GST
Box of 25 - 115 x 230 mm Very Fine Maroon Aluminium Oxide Thin Flex Bear-Tex pads
• Box of 25 Pads.
• Multi-purpose economy product ideal for sanding wooden floors.
• Colour - Maroon
• Grit - Very Fine.
• Grain - Aluminium Oxide
• Size - 115 mm x 230 mm
• Strong cloth backing.
• Open grain construction.
• Good cut rate and reduced clogging.
• Ideal for use before primer and on primed surfaces.
• Removes rust and cleans metal.
Our price: $50.84
including GST
115 x 230 mm Ultra Fine Grey Silicon Carbide Thin Flex Bear-Tex pads
• Multi-purpose economy product ideal for sanding wooden floors.
• Colour - Grey.
• Grit - Ultra Fine.
• Grain - Silicon Carbide
• Size - 115 mm x 230 mm
• Strong cloth backing.
• Open grain construction.
• Good cut rate and reduced clogging.
• Ideal for blending applications and final scuffing of primer.
• Flexible and non-loading.
Our price: $3.50
including GST
Box of 25 - 115 x 230 mm Ultra Fine Grey Silicon Carbide Thin Flex Bear-Tex pads
• Box of 25 Pads.
• Multi-purpose economy product ideal for sanding wooden floors.
• Colour - Grey.
• Grit - Ultra Fine.
• Grain - Silicon Carbide
• Size - 115 mm x 230 mm
• Strong cloth backing.
• Open grain construction.
• Good cut rate and reduced clogging.
• Ideal for blending applications and final scuffing of primer.
• Flexible and non-loading.
Our price: $50.84
including GST
Qty 5 - 150 mm x 80 grit NORTON M920 Ceramic MESH-POWER Hook & Loop Sanding Disc
Our price: $15.87
including GST
Qty 50 - 150 mm x 80 grit NORTON M920 Ceramic MESH-POWER Hook & Loop Sanding Disc
Our price: $92.28
including GST
150 mm diameter x 25 mm x 31.75 mm 38A46KVBE Grinding Wheel
• 46 grit
• Norton Brand
• White Aluminium Oxide for Grinding Tool Steel.
• Multi Bore to suit any shaft diameter.
• Maximum operating speed 4140 rpm.
• Norton Brand
• White Aluminium Oxide for Grinding Tool Steel.
• Multi Bore to suit any shaft diameter.
• Maximum operating speed 4140 rpm.
List price: $26.99
Our price: $25.64
save 5%
including GST
150 mm diameter x 80 grit Norton H875 Adhesive disc
• Premium Zirconia & Aluminium Oxide grain mix.
• Norton BLUE Magnum Premium product.
• Made in USA.
• Designed for sanding metal so is excellent for hardwood sanding and stock removal.
• Disc has an adhesive backing.
• Norton BLUE Magnum Premium product.
• Made in USA.
• Designed for sanding metal so is excellent for hardwood sanding and stock removal.
• Disc has an adhesive backing.
Our price: $2.98
including GST
230 x 280 mm x 60 grit Norton T417 Wet and Dry Sheet
• Perfect for sanding metals, automotive finishes and for sanding between coats of interior house paint.
• Made with Silicon Carbide grain which retains its sharpness throughout its sanding life.
• Used dry, or to reduce clogging, use water as a lubricant.
• Made with Silicon Carbide grain which retains its sharpness throughout its sanding life.
• Used dry, or to reduce clogging, use water as a lubricant.
Our price: $2.66
including GST
50 x 785 mm x 60 grit Norton R980P BLAZE Belt
Our price: $19.90
including GST
50 x 785 mm x 80 grit Norton R980P BLAZE Belt
Our price: $18.72
including GST
Dark Tan 740 Bear-Tex Pad
• Heavy duty pad.
• Colour - Dark Tan
• Medium, Grit 100 - 150
• Grain - Aluminium Oxide
• Size - 150 mm x 230 mm
• For heavy duty industrial use.
• Use as a replacement for steel wool, and wire brushes.
Applications include:
• Heavy duty blending.
• Deburring and cleaning jobs.
• Rust removal.
• Weld blending.
Our price: $14.06
including GST
Norton Abrasive Restorer
• Size: 220 x 30 x 40 mm.
• Industrial Quality Abrasive Restorer for cleaning clogged sanding discs and belts.
Directions:
• Press Restorer firmly onto the abrasive surface while the disc or belt is in motion.
• Ensure both the machine and Restorer are securely held.
• Regular use will extend the abrasive life and prevent a build-up of resin, glue, filler, and grinding dust, which if not cleaned can burn into the abrasive surface.
• Industrial Quality Abrasive Restorer for cleaning clogged sanding discs and belts.
Directions:
• Press Restorer firmly onto the abrasive surface while the disc or belt is in motion.
• Ensure both the machine and Restorer are securely held.
• Regular use will extend the abrasive life and prevent a build-up of resin, glue, filler, and grinding dust, which if not cleaned can burn into the abrasive surface.
Our price: $14.39
including GST
Nuisance Dust Masks - Box of 50
• Contains 50 masks.
• Disposable Mask for sanding, mowing, dusting and cleaning.
• Suitable for use against non-toxic dust, powder, pollen and other common airborne irritants around the home, factory, farm and garden.
Ideal for:
• Wood, plaster and plastic sanding.
• Cleaning basements, attics, garages, and dusty work areas.
• Yard, garden and farmwork.
• Lab or clean room use.
WARNING:
• This product will not protect against gases, vapours.
• It is not suitable for protecting the wearer when spraying paint, handling asbestos or welding.
• It is only suitable for non-toxic dust, such as sawdusts, household and garden dusts.
Important Notice to Purchaser:
The following warranty is made in lieu of all other warranties expressed or implied, including but not limited to the implied warranties of merchantability and fitness for purpose. Manufacturer's only obligation shall be to replace such quantity of product proved to be defective. User shall determine the suitability of the product for his intended use, and assume all risks and liability in connection therewith.
• Disposable Mask for sanding, mowing, dusting and cleaning.
• Suitable for use against non-toxic dust, powder, pollen and other common airborne irritants around the home, factory, farm and garden.
Ideal for:
• Wood, plaster and plastic sanding.
• Cleaning basements, attics, garages, and dusty work areas.
• Yard, garden and farmwork.
• Lab or clean room use.
WARNING:
• This product will not protect against gases, vapours.
• It is not suitable for protecting the wearer when spraying paint, handling asbestos or welding.
• It is only suitable for non-toxic dust, such as sawdusts, household and garden dusts.
Important Notice to Purchaser:
The following warranty is made in lieu of all other warranties expressed or implied, including but not limited to the implied warranties of merchantability and fitness for purpose. Manufacturer's only obligation shall be to replace such quantity of product proved to be defective. User shall determine the suitability of the product for his intended use, and assume all risks and liability in connection therewith.
Our price: $14.09
including GST
50 x 1220 mm x 36 grit Norton R980P BLAZE Belt
Our price: $32.75
including GST
50 x 914 mm x 36 grit Norton R980P BLAZE Belt
Our price: $24.60
including GST
125 mm diameter x 40 grit Norton H231 Hook & Loop disc
• Anti-Static Open Coat
• E weight paper velour backing
• Resin Coating
• E weight paper velour backing
• Resin Coating
Our price: $1.69
including GST
Qty 5 - 150 mm x 120 grit NORTON M920 Ceramic MESH-POWER Hook & Loop Sanding Disc
Our price: $14.95
including GST
Qty 50 - 150 mm x 120 grit NORTON M920 Ceramic MESH-POWER Hook & Loop Sanding Disc
Our price: $86.91
including GST
150 mm diameter x 25 mm x 31.75 mm 38A60JVBE Grinding Wheel
• 60 grit
• Norton Brand
• White Aluminium Oxide for Grinding Tool Steel.
• Multi Bore to suit any shaft diameter.
• Maximum operating speed 4140 rpm.
• Norton Brand
• White Aluminium Oxide for Grinding Tool Steel.
• Multi Bore to suit any shaft diameter.
• Maximum operating speed 4140 rpm.
List price: $26.99
Our price: $25.64
save 5%
including GST
230 x 280 mm x 80 grit Norton T417 Wet and Dry Sheet
• Perfect for sanding metals, automotive finishes and for sanding between coats of interior house paint.
• Made with Silicon Carbide grain which retains its sharpness throughout its sanding life.
• Used dry, or to reduce clogging, use water as a lubricant.
• Made with Silicon Carbide grain which retains its sharpness throughout its sanding life.
• Used dry, or to reduce clogging, use water as a lubricant.
Our price: $2.35
including GST
50 x 785 mm x 120 grit Norton R980P BLAZE Belt
Our price: $18.35
including GST
Maroon 747 Bear-Tex Pad
• General purpose pad.
• Colour - Maroon
• Fine, Grit 240 - 360
• Grain - Aluminium Oxide
• Size - 150 mm x 230 mm
• Tough, economical, flexible, waterproof and solvent resistant.
Applications include:
• Cleaning, finishing and deburring of machinery and tools.
• Removal of rust.
• Defuzzing of wood.
• De-nibbing of plastic component parts.
• Cleaning solid surfaces (marble, granite etc)
Our price: $4.36
including GST
Toxic Dust Mist Masks P1 - Box of 20
• Contains 20 masks.
• Tested to Australian Standard 1716 Class P1.
• P1 - Disposable Mask for sanding, sawing and insulation fibres.
• Provides protection against hardwood and softwoods, fibreglass dust, aluminium, coal, cotton dust, flour, iron ore, manganese, mica, free silica, talc and many others.
• Also for mists of liquid which do not produce harmful gases or vapours eg. oil mists.
• WARNING:
• NOT SUITABLE FOR ANY PAINTING PROCESS.
• This product will not protect against gases, vapours, fumes or paint spray.
• Do not use this product against thermal generated particles such as metal fumes from welding.
• Do not use this respirator if mechanically generated particulates exceed 10 times their Threshold Limited Values (TLV).
• Not suitable for Asbestos, Sand blasting operations, Highly Toxic atmospheres, Oxygen deficient areas, Confined spaces or Rescue work.
Important Notice to Purchaser:
The following warranty is made in lieu of all other warranties expressed or implied, including but not limited to the implied warranties of merchantability and fitness for purpose. Manufacturer's only obligation shall be to replace such quantity of product proved to be defective. User shall determine the suitability of the product for his intended use, and assume all risks and liability in connection therewith.
• Tested to Australian Standard 1716 Class P1.
• P1 - Disposable Mask for sanding, sawing and insulation fibres.
• Provides protection against hardwood and softwoods, fibreglass dust, aluminium, coal, cotton dust, flour, iron ore, manganese, mica, free silica, talc and many others.
• Also for mists of liquid which do not produce harmful gases or vapours eg. oil mists.
• WARNING:
• NOT SUITABLE FOR ANY PAINTING PROCESS.
• This product will not protect against gases, vapours, fumes or paint spray.
• Do not use this product against thermal generated particles such as metal fumes from welding.
• Do not use this respirator if mechanically generated particulates exceed 10 times their Threshold Limited Values (TLV).
• Not suitable for Asbestos, Sand blasting operations, Highly Toxic atmospheres, Oxygen deficient areas, Confined spaces or Rescue work.
Important Notice to Purchaser:
The following warranty is made in lieu of all other warranties expressed or implied, including but not limited to the implied warranties of merchantability and fitness for purpose. Manufacturer's only obligation shall be to replace such quantity of product proved to be defective. User shall determine the suitability of the product for his intended use, and assume all risks and liability in connection therewith.
Our price: $26.68
including GST
125 mm x 60 grit Norton H231 Hook and Loop Sanding disc
• Anti-Static Open Coat
• E weight paper Hook and Loop backing
• Resin Coating
• E weight paper Hook and Loop backing
• Resin Coating
Our price: $1.57
including GST
125 mm x 40 grit Norton H231 8 Hole Hook and Loop Sanding disc
• Open Coat
• 8 Hole Dust Extraction
• E weight paper Hook and Loop backing
• Resin Coating
• 8 Hole Dust Extraction
• E weight paper Hook and Loop backing
• Resin Coating
Our price: $1.69
including GST
150 mm diameter x 25 mm x 31.75 mm 38A80KVBE Grinding Wheel
• 80 grit
• Norton Brand
• White Aluminium Oxide for Grinding Tool Steel.
• Multi Bore to suit any shaft diameter.
• Maximum operating speed 4140 rpm.
• Norton Brand
• White Aluminium Oxide for Grinding Tool Steel.
• Multi Bore to suit any shaft diameter.
• Maximum operating speed 4140 rpm.
List price: $26.99
Our price: $25.64
save 5%
including GST
230 x 280 mm x 120 grit Norton T417 Wet and Dry Sheet
• Perfect for sanding metals, automotive finishes and for sanding between coats of interior house paint.
• Made with Silicon Carbide grain which retains its sharpness throughout its sanding life.
• Used dry, or to reduce clogging, use water as a lubricant.
• Made with Silicon Carbide grain which retains its sharpness throughout its sanding life.
• Used dry, or to reduce clogging, use water as a lubricant.
Our price: $1.75
including GST
230 x 280 mm x 80 grit Norton A275 No-Fil Sheet
• Waterbased Stearate No-Fil to Reduce Clogging.
• Premium B-weight latex fiber reinforced paper backing
• Made in Canada.
• Premium B-weight latex fiber reinforced paper backing
• Made in Canada.
Our price: $2.23
including GST
Green 796 Bear-Tex Pad
• Scouring pad.
• Colour - Green
• Fine, Grit 240 - 360
• Grade - Fine
• Grain - Aluminium Oxide
• Size - 150 mm x 230 mm
• Very fine economical pad, the tough synthetic fibres are ideal for cleaning and finishing.
Applications include:
• Removing persistent marks and stains.
• Applying finishes on non-ferrous metals.
• Removing accumulations of rust and corrosion from metals.
• Preparing surfaces for painting.
Our price: $3.74
including GST
Toxic Dust Mist Welding Fume Mask P2 with Valve - Box of 12
• Contains 12 masks.
• Tested to Australian Standard 1716 Class P2.
• P2 - Disposable Mask for welding fumes, toxic wood, and metal dusts.
• Provides protection against mechanically and thermally generated particles such as hardwood and softwood dust, mist and fumes to Class P2 and including metallic fume from smelting, welding, brazing, etc. Also, mists of liquids which do not produce harmful gases or vapours.
• WARNING:
• NOT SUITABLE FOR ANY PAINTING PROCESS.
• This product will not protect against gases, vapours, or paint spray.
• Not suitable for asbestos or sand blasting.
• Only for oxygen atmospheres over 19.5%.
• Not for contaminants dangerous to life or health.
• Not for concentrations exceeding x 10TLV.
• Facial hair will affect seal.
• Do Not alter or modify this mask.
• Do not use with hexavalent chromium, cyanide, radioactive compounds, arsenic, beryllium, and cadmium.
Important Notice to Purchaser:
The following warranty is made in lieu of all other warranties expressed or implied, including but not limited to the implied warranties of merchantability and fitness for purpose. Manufacturer's only obligation shall be to replace such quantity of product proved to be defective. User shall determine the suitability of the product for his intended use, and assume all risks and liability in connection therewith.
• Tested to Australian Standard 1716 Class P2.
• P2 - Disposable Mask for welding fumes, toxic wood, and metal dusts.
• Provides protection against mechanically and thermally generated particles such as hardwood and softwood dust, mist and fumes to Class P2 and including metallic fume from smelting, welding, brazing, etc. Also, mists of liquids which do not produce harmful gases or vapours.
• WARNING:
• NOT SUITABLE FOR ANY PAINTING PROCESS.
• This product will not protect against gases, vapours, or paint spray.
• Not suitable for asbestos or sand blasting.
• Only for oxygen atmospheres over 19.5%.
• Not for contaminants dangerous to life or health.
• Not for concentrations exceeding x 10TLV.
• Facial hair will affect seal.
• Do Not alter or modify this mask.
• Do not use with hexavalent chromium, cyanide, radioactive compounds, arsenic, beryllium, and cadmium.
Important Notice to Purchaser:
The following warranty is made in lieu of all other warranties expressed or implied, including but not limited to the implied warranties of merchantability and fitness for purpose. Manufacturer's only obligation shall be to replace such quantity of product proved to be defective. User shall determine the suitability of the product for his intended use, and assume all risks and liability in connection therewith.
Our price: $35.71
including GST
