Products Map

A B C D E F G H I J M N P S T W #


Dark Tan 740 Bear-Tex Pad

• Heavy duty pad.
• Colour - Dark Tan
• Medium, Grit 100 - 150
• Grain - Aluminium Oxide
• Size - 150 mm x 230 mm
• For heavy duty industrial use.
• Use as a replacement for steel wool, and wire brushes.

Applications include:
• Heavy duty blending.
• Deburring and cleaning jobs.
• Rust removal.
• Weld blending.

Our price: $11.15
including GST
Order Quantity
DM20 Flat Fold P2 Mask with Valve
• Contains 1 mask.
• Australian Standard 1716 :2003

P2 Respirators may be used for mechanically & thermally generated particulates:
• dusts e.g. silica and coal
• mists, fumes, smoke e.g. lead & welding fumes + bushfire smoke

Applications include:
• Sanding, Grinding and blasting
 
DM20 - SUPERIOR COMFORT & CONVENIENCE:

Comfort
• One way exhalation valve helps minimise moisture and heat build up.
• Large filtering surface area provides low breathing resistance.
• Soft non-latex straps minimise irritation.
• Wide straps & padded nose bridge provides secure & comfortable fit.

Convenience
• Folds flat for easy storage before and in between usage.
• Individually wrapped for improved portability & hygiene.
 
Important Information
Shelf Life Storage & Operating Conditions
• Unopened respirators may be used up to 3 years from the date of manufacture.
• Store in a cool, dry location away from direct sunlight, ideally between 15-30 deg Celsius. Operating temperature 0-50 deg Celsius.
• Filter deteriorates in the presence of oil mist. Note that respirator should be discarded after eight hours use or earlier if filter becomes clogged and breathing resistance increases.

USE LIMITATIONS - DO NOT USE THIS RESPIRATOR WHERE:
• Contaminant concentrations are immediately dangerous to life and health, unknown or exceed ten times the relevant exposure standard for the contaminant.
• Toxic gases or vapours are present.
• After performing a fit check you are unable to obtain a satisfactory fit due to facial hair or other characteristics that prevent a good seal between the edge of the respirator and your face.
• Oxygen deficient atmospheres (<19.5%), confined spaces or poorly ventilated areas.
• You can smell, or taste the contaminant, experience nose or throat irritations or any other distress - leave the contaminated area.
• You have not been adequately trained in Selection use & maintenance of respiratory protection per AS/NZS 1715 & are unable to determine it's suitability for your application.

Please contact YHS via their website www.yhs.net.au or by phone 03 9876 7099 if you require further information regarding respirator selection, fit testing or training.
FAILURE TO FOLLOW ALL THE INSTRUCTIONS & USE LIMITATIONS FOR THIS PRODUCT CAN REDUCE IT'S EFFECTIVENESS AND MAY RESULT IN SICKNESS OR DEATH.
As the use of this information and the product is beyond the control of YHS Pty Ltd, it is the users obligation to ensure that the correct respirator is selected and used safely. To the extent permitted by law any liability arising from use of or failure of this product is limited to product replacement cost and does not extend to any loss or damage which may be caused as a consequence of such use or failure.
Made in China for YHS Pty Ltd

Our price: $3.41
including GST
Order Quantity
DM20 Flat Fold P2 Mask with Valve - Box of 10
• Contains 10 masks.
• Australian Standard 1716 :2003

P2 Respirators may be used for mechanically & thermally generated particulates:
• dusts e.g. silica and coal
• mists, fumes, smoke e.g. lead & welding fumes + bushfire smoke

Applications include:
• Sanding, Grinding and blasting
 
DM20 - SUPERIOR COMFORT & CONVENIENCE:

Comfort
• One way exhalation valve helps minimise moisture and heat build up.
• Large filtering surface area provides low breathing resistance.
• Soft non-latex straps minimise irritation.
• Wide straps & padded nose bridge provides secure & comfortable fit.

Convenience
• Folds flat for easy storage before and in between usage.
• Individually wrapped for improved portability & hygiene.
 
Important Information
Shelf Life Storage & Operating Conditions
• Unopened respirators may be used up to 3 years from the date of manufacture.
• Store in a cool, dry location away from direct sunlight, ideally between 15-30 deg Celsius. Operating temperature 0-50 deg Celsius.
• Filter deteriorates in the presence of oil mist. Note that respirator should be discarded after eight hours use or earlier if filter becomes clogged and breathing resistance increases.

USE LIMITATIONS - DO NOT USE THIS RESPIRATOR WHERE:
• Contaminant concentrations are immediately dangerous to life and health, unknown or exceed ten times the relevant exposure standard for the contaminant.
• Toxic gases or vapours are present.
• After performing a fit check you are unable to obtain a satisfactory fit due to facial hair or other characteristics that prevent a good seal between the edge of the respirator and your face.
• Oxygen deficient atmospheres (<19.5%), confined spaces or poorly ventilated areas.
• You can smell, or taste the contaminant, experience nose or throat irritations or any other distress - leave the contaminated area.
• You have not been adequately trained in Selection use & maintenance of respiratory protection per AS/NZS 1715 & are unable to determine it's suitability for your application.

Please contact YHS via their website www.yhs.net.au or by phone 03 9876 7099 if you require further information regarding respirator selection, fit testing or training.
FAILURE TO FOLLOW ALL THE INSTRUCTIONS & USE LIMITATIONS FOR THIS PRODUCT CAN REDUCE IT'S EFFECTIVENESS AND MAY RESULT IN SICKNESS OR DEATH.
As the use of this information and the product is beyond the control of YHS Pty Ltd, it is the users obligation to ensure that the correct respirator is selected and used safely. To the extent permitted by law any liability arising from use of or failure of this product is limited to product replacement cost and does not extend to any loss or damage which may be caused as a consequence of such use or failure.
Made in China for YHS Pty Ltd

Our price: $27.28
including GST
Order Quantity
Double Density Foam Hand Sanding Block 65 x 110 mm

• Hook and Loop Sanding Block.
• Constructed of two densities of foam - 1 soft for contour sanding, 1 hard for flat sanding.
• The hook and loop face works well with hook and loop sheets.

Our price: $20.02
including GST
Order Quantity
Double Sided Sanding Sponge - Fine
• Size - 97 mm x 123 mm x 12 mm
• Grade - Fine
• Grain - Silicon Carbide
• These sponges are excellent for denibbing mouldings and turnings
Our price: $2.41
including GST
Order Quantity
Double Sided Sanding Sponge - Medium
• Size - 97 mm x 123 mm x 12 mm
• Grade - Medium
• Grain - Silicon Carbide
• These sponges are excellent for profile sanding
Our price: $2.41
including GST
Order Quantity
Double Sided Sanding Sponge - Ultra Fine
• Size - 97 mm x 123 mm x 12 mm
• Grade - Ultra Fine
• Grain - Silicon Carbide
• These sponges are excellent for denibbing mouldings and turnings
Our price: $2.41
including GST
Order Quantity
Dura-Block 1/3 Block AF4401

• Model AF4401
• This block is designed to follow slightly curved or flat panels without digging into fill material.
• Size: 38 mm x 68 mm x 140 mm long

Our price: $22.95
including GST
Order Quantity Out of stock
Dura-Block 1/3 Radius Block AF4412

• Model 4412
• This curved face block is designed to follow slightly curved or flat panels without digging into fill material.
• Size: 45 mm x 65 mm x 140 mm long

Our price: $27.45
including GST
Order Quantity
Dura-Block 2/3 Block AF4402

• Model AF4402
• This Block is designed to allow the user to accurately block flat panels and panels with slight curves.
• Size: 35 mm x 68 mm x 280 mm long

Our price: $31.45
including GST
Order Quantity
Dura-Block 2/3 Radius Block AF4413

• Model 4413
• This curved faced block is designed to allow the user to accurately block flat panels and panels with slight curves.
• Size: 45 mm x 65 mm x 280 mm long

Our price: $41.45
including GST
Order Quantity
Dura-Block 5 Piece Kit

• Model AF44XDVD
• This Kit includes the following:-
• AF4401 - 1/3 Block
• AF4402 - 2/3 Block
• AF4403 - Full Size Block
• AF4409 - Long Block
• AF4410 - Marine Block
• DVD - Steve's Auto Restoration presents "Surface Prep & Block Sanding." 1 hr 12 min.

Our price: $209.95
including GST
Order Quantity
Dura-Block 6 Piece Kit

• Model AF44A
• This Kit includes the following:-
• 1 - AF4400 - Standard Block
• 1 - AF4401 - 1/3 Block
• 1 - AF4402 - 2/3 Block
• 1 - AF4404 - Round Block
• 2 - AF4405 - Scruff Block

Our price: $99.95
including GST
Order Quantity
Dura-Block 7 Piece Hook & Loop Kit

• Model AF44HL
• This Kit includes the following:-
• AF4420 - Standard Hook & Loop Block
• AF4417 - 1/3 Hook & Loop Block
• AF4418 - 2/3 Hook & Loop Block
• AF4419 - Full Size Hook & Loop Block
• AF4421 - Round Hook & Loop Block
• AF4422 - Scruff Hook & Loop Block
• AF4408-S - Dura-Scrub Soap

Our price: $134.90
including GST
Order Quantity
Dura-Block 7 Piece Kit

• Model AF44L
• This Kit includes the following:-
• AF4400 - Standard Block
• AF4401 - 1/3 Block
• AF4402 - 2/3 Block
• AF4403 - Full Size Block
• AF4404 - Round Block
• AF4405 - Scruff Block
• AF4408-S - Dura-Scrub Soap

Our price: $129.95
including GST
Order Quantity
Dura-Block Composite Block AF4415

• Model AF4415
• Rigid injection moulded composites makes this perfectly milled block our most accurate for flat surfaces.
• Size: 38 mm x 68 mm x 280 mm long

Our price: $55.95
including GST
Order Quantity
Dura-Block Dura-Disc AF4411

• Model 4411
• Dura-Disc or Taco-Block
• Designed to accurately block curved or flat surfaces.
• To be used with 6" 150 mm diameter round paper
• Size: 15 mm x 70 mm x 150 mm

Our price: $10.65
including GST
Order Quantity
Dura-Block Full Size Block AF4403

• Model AF4403
• A favourite among professionals when blocking large surfaces.
• Size: 35 mm x 68 mm x 405 mm long

Our price: $51.95
including GST
Order Quantity
Dura-Block Full Size Radius Block AF4414

• Model 4414
• This curved faced block is designed to allow the user to accurately block flat panels and panels with slight curves.
• Size: 45 mm x 65 mm x 405 mm long

Our price: $57.95
including GST
Order Quantity
Dura-Block Long Block AF4409

• Model AF4409
• This block is designed to allow the user to accurately block flat panels and panels with a slight curves.
• Size: 35 mm x 68 mm x 610 mm long

Our price: $74.95
including GST
Order Quantity
Dura-Block Marine Block AF4410

• Model AF4410
• A favourite among the professionals when blocking large surfaces.
• Size: 35 mm x 68 mm x 760 mm long

Our price: $97.95
including GST
Order Quantity
Dura-Block Round Block AF4404

• Model 4404
• This is the "Round" style block.
• Use to sand and block highly curved surfaces.
• Size: 38 mm diameter x 280 mm long

Our price: $16.45
including GST
Order Quantity
Dura-Block Scruff Block AF4405

• Model AF4405
• This Block is designed for sanding and prep work.
• It allows for easy use and much improved durability and firmness.
• Size: 13 mm x 64 mm x 136 mm long

Our price: $10.45
including GST
Order Quantity
Dura-Block Standard Block AF4400

• Model AF4400
• This Block is designed to follow contours or flats.
• No dents, no ripples
• Size: 19 mm x 35 mm x 280 mm long

Our price: $16.45
including GST
Order Quantity
Dura-Block Tear Drop Block AF4406

• Model 4406
• This "tear drop" adds a rounded curve with a flat surface for hard to sand areas.
• Size: 35 mm x 68 mm x 280 mm long

Our price: $36.95
including GST
Order Quantity