- Accessories
- Back-up Pads
- Bargain Buys
- Bear-Tex Hand Pads
- Belts
- Buffs
- Combos
- Conveyor Feed Belt
- Discs - Adhesive backed
- Discs - Fibre
- Discs - Hook & Loop
- Discs - Rapid Strip
- Discs - Twist Lock
- Dura-Block®
- Flap Discs
- Flap Wheels
- Graphite Slip Cloth
- Grinding Wheels
- Hook & Loop Converter
- Interface Pads
- Mesh/Net Sandpaper
- Micro-Mesh®
- Oscillating Spindle Sander Sleeves
- Painting Accessories
- Pen Making
- Polishes
- Polishing Pads
- Resin Sanding & Polishing
- Rolls
- Sanding Blocks
- Sanding Mops
- Sanding Sponges
- Sanding Stars
- Sandpaper Files
- Sharpening Products
- Sheets - Adhesive Backed Wet & Dry
- Sheets - Dry Rub
- Sheets - Microfinishing Lapping Film
- Sheets - Hook & Loop
- Sheets - Wet & Dry
- Wad Punches
Without a doubt the MicroMesh cloth backed abrasives are my favourite. When used with a leather strop backing they put a wicked edge on all my knives.
Oct 12, 2021
Home
::
Graphite Slip Cloth
Hermes Graphite Slip Cloth is available in 150 mm wide or 200 mm wide to extend the life of your sanding belts.
Attach to the platen or your sander to extend belt life.
Less join breakages due to join glue not heating as much.
Reduces clogging due to less heat build-up.
Attach to the platen or your sander to extend belt life.
Less join breakages due to join glue not heating as much.
Reduces clogging due to less heat build-up.
150 mm wide x 100 mm Hermes GL581 Graphite Slip Cloth
SKU: GL581150
- Graphite Slip Cloth reduces friction and heat on the back of your sanding belt.
- Sold in 100 mm increments.
- e.g. Qty 3 = 300 mm
- Attach to the Platen (metal sanding surface) of your sander.
- Hermes GL581 Slip Cloth is a Graphite Flake slip cloth.
- Extends belt life.
- Less join breakages due to join glue not heating as much.
- Reduces clogging due to less heat build-up.
- Can be attached using a good quality, heat-resistant glue. This can be purchased at your local hardware store.
List price: $6.16
Our price: $3.00
save 51%
200 mm wide x 100 mm Hermes GL581 Graphite Slip Cloth
SKU: GL581200
- Graphite Slip Cloth reduces friction and heat on the back of your sanding belt.
- Sold in 100 mm increments.
- e.g. Qty 3 = 300 mm
- Attach to the Platen (metal sanding surface) of your sander.
- Hermes GL581 Slip Cloth is a Graphite Flake slip cloth.
- Extends belt life.
- Less join breakages due to join glue not heating as much.
- Reduces clogging due to less heat build-up.
- Can be attached using a good quality, heat-resistant glue. This can be purchased at your local hardware store.
List price: $8.19
Our price: $3.98
save 51%
INFORMATION
CUSTOMER SERVICE
EXTRAS
MY ACCOUNT
CONTACT US
-
ADDRESS:
The Sandpaper Man
Wynnum
Queensland
Australia -
EMAIL
Contact Us
Powered by Lumino
Copyright © 1991-2024 The Sandpaper Man
Copyright © 1991-2024 The Sandpaper Man